Microtech LT-10s Tach Output
#1
so ...no time for this
Thread Starter
LT-10s Tach Output
I recentlly installed the LT-10s version but it comes with a LT-8s manual. I have not been able to identify the Tach Output signal. Anyone knows?
could I just jump the signal from any ignition output?
thx!!!!
could I just jump the signal from any ignition output?
thx!!!!
#3
so ...no time for this
Thread Starter
thx Dale,,,
that's what I though but is not working. Maybe I'm using the wrong stock tach input? Isn't it the Yellow/Green wire? (FD3S '94)
Also, I wrote to Tim Possingham [tim@microtechefi.com] and this is what he told me:
"The blue/white wire is the tach out off the Microtech. If your using stock coils then there is a tach out off the stock module.
Regards, Tim."
... and now what!!!?
that's what I though but is not working. Maybe I'm using the wrong stock tach input? Isn't it the Yellow/Green wire? (FD3S '94)
Also, I wrote to Tim Possingham [tim@microtechefi.com] and this is what he told me:
"The blue/white wire is the tach out off the Microtech. If your using stock coils then there is a tach out off the stock module.
Regards, Tim."
... and now what!!!?
#5
so ...no time for this
Thread Starter
Originally Posted by Arvika
Why not just pick the signal from the - side of the trailing coil/coils?
Yeap, I'll do that but would like to have it like it should be to avoid more cable routings. BTW I still need to know if I'm picking the right stock tach input (Y/G)...
Does anyone knows which is color of the stock tach input (FD3S)?
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Adaptronic Engine Mgmt - AUS
3
09-22-15 09:33 AM