Microtech ignition coil wiring question?
07-17-06, 01:05 PM
#1
Banned. I got OWNED!!!
Thread Starter
Join Date: Oct 2005
Location: Florida
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
ignition coil wiring question?
when I used my multi-tester both wires of the ignition coil get power 12v when on should I get only one side 12v and the other nothing? I made sure I didnt cross anything everything looks good except the reading
07-18-06, 10:06 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Car? ECU? Which coil? Where are you measuring?
If this is a 2nd gen (most common...) then you can get your 12V IGN power from the black/yellow wire at either the trailing or leading coil. There are two such wires at the trailing, one at the leading.
If this is a 2nd gen (most common...) then you can get your 12V IGN power from the black/yellow wire at either the trailing or leading coil. There are two such wires at the trailing, one at the leading.
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM
befarrer
Microtech
3
08-22-15 05:52 PM
