Microtech Area is for discussing Microtech systems

Microtech How well did your car run with the base map?

Thread Tools
 
Search this Thread
 
Old Mar 5, 2004 | 10:26 AM
  #1  
SwooshMan's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2002
Posts: 355
Likes: 0
From: Salt Lake City
How well did your car run with the base map?

I have an S4 gxl with a j-spec S5 motor including turbo and manifolds.I'll be finishing the swap tommorrow. The only real mods i have that actually effect power are the TB mod, Intake and very open exhaust.I removed all the emmissions and the rats nest as well. How well can i expect my car to run with the basemap? I have an lt-8. It will be tuned shortly but i'm curious to how it will run. Thanks.
Reply
Old Mar 5, 2004 | 05:15 PM
  #2  
Crusader_9x's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
 
Joined: Sep 2001
Posts: 1,384
Likes: 0
From: Woodstock, GA
well when i ordered my lt8 form br7 i told them that i had stock everything. by the time i gotr the lt8 i had changed my mind a littel and ended up going witha t04r and 1680 secondaries with 680 primaries. with just a littel bit of help over the phone/instant mesage i got it adjusted almost as good as the stock computer, \minus when the secondaries came on and other stuff.

but i have haerd other people say, who didnt change anything from the time they ordered to the install, that it ran better than stock.
Reply
Old Mar 6, 2004 | 12:10 AM
  #3  
silverrotor's Avatar
Moderator
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Mar 2002
Posts: 7,592
Likes: 5
From: Toronto, Corporate Canada
Re: How well did your car run with the base map?

Originally posted by SwooshMan
I have an S4 gxl with a j-spec S5 motor including turbo and manifolds.I'll be finishing the swap tommorrow. The only real mods i have that actually effect power are the TB mod, Intake and very open exhaust.I removed all the emmissions and the rats nest as well. How well can i expect my car to run with the basemap? I have an lt-8. It will be tuned shortly but i'm curious to how it will run. Thanks.
Right down from the same FC, down to the same Engine ie. s4 NA > S5 TII Engine, we wired up the LT8 to a fresh rebuilt, streetported Engine and It ran fine.

When you ordered It, did you specify for the LT8 to have the values for the s5 TII Motor and mods? Or the s4 Engine?
Reply
Old Mar 6, 2004 | 07:20 PM
  #4  
SwooshMan's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2002
Posts: 355
Likes: 0
From: Salt Lake City
In al honesty i dont know, i had my friend order it. I think he only told them it was a stock 13bt
Reply
Old Mar 10, 2004 | 09:27 PM
  #5  
turborotarypower's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 430
Likes: 1
From: south jersey
well i had some issues when i first started the car up, like the tps only give a zero value for one of the two values no matter what i did, stalling out when stopping or coasting to a stop and poor drivability which could be my injectors since i was fouling plugs out constantly(has since been sent to rc engineering) other than that i gotta put the injectors back in and go from there.
Reply
Old Mar 10, 2004 | 11:19 PM
  #6  
SwooshMan's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: May 2002
Posts: 355
Likes: 0
From: Salt Lake City
I started up mine yesterday and drove it around a little today. It runs pretty damn good.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
Haltech Forum
11
Mar 11, 2019 05:34 PM
stickmantijuana
Microtech
5
Aug 23, 2015 11:04 AM
rx7brandon
General Rotary Tech Support
3
Aug 16, 2015 10:55 AM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM




All times are GMT -5. The time now is 06:56 PM.