Microtech Area is for discussing Microtech systems

Microtech Ecu making noise when powered on

Old 11-28-05, 12:17 AM
  #1  
Full Member

Thread Starter
iTrader: (24)
 
DriftinJim's Avatar
 
Join Date: May 2002
Location: South
Posts: 246
Likes: 0
Received 12 Likes on 4 Posts
Ecu making noise when powered on

When I key the car on (engine not cranking) my LT-8 ecu makes a constant buzz noise. It sounds like a relay switching back n forth *very* quickly. I've heard relays make this noise when the battery is low (my battery is freshly charged at 12.2v). Also, the green light comes on and seems to be flashing super quickly(almost constant) along with the buzz.

I removed the ecu and gave it power and ground and no buzzing. I checked the ecu plug on the harness and the only wires showing power are the main battery power with 12v, fuel pump wire at 12v, and tach wire at 1v.

I'm thinking its a bad connection or corroded wire but the main power wire is showing 12v. I can only guess that its a crap connection somewhere. If the injector or ignition wires were shorting, does anybody know if the Ecu would make such a noise/buzz. I'm kind've lost on this one other than just checking connections.
Old 11-28-05, 05:48 PM
  #2  
Rotary Enthusiast

 
10sec rx7's Avatar
 
Join Date: Mar 2001
Location: Sydney, Australia
Posts: 1,350
Likes: 0
Received 8 Likes on 7 Posts
it will be the pink wire not hooked up correctly
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
Queppa
New Member RX-7 Technical
8
09-02-18 09:53 AM
befarrer
Microtech
3
08-22-15 05:52 PM
gtcd
1st Generation Specific (1979-1985)
30
08-19-15 02:44 AM


Thread Tools
Search this Thread
Quick Reply: Microtech Ecu making noise when powered on



All times are GMT -5. The time now is 06:37 PM.