Microtech CRANK VALUES FOR 88" 13B
#1
Junior Member
Thread Starter
Join Date: Jan 2004
Location: RENO
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
CRANK VALUES FOR 88" 13B
Im Looking For The Stock Cranking Values Sent From Microtech For The Lt8. I Have Tried Silverrotors S5 Map But It Still Wont Start.
#3
Junior Member
Thread Starter
Join Date: Jan 2004
Location: RENO
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
I Originally Had A 88' Turbo Motor. I Have Put A Stock 13b In The Buggy To Sell It And Re Set All The Values On The Lt8 Per Your List. Thank You By The Way.
It Still Doesnt Want To Start. 1 Out Of 10 Times It Will Run. It Wants To Foul The Plugs. Once It Is Running I Have Gotten It Up To Temperture And Timed It And Set The Load And Idle Maps. But It Will Not Start On Cranking?
It Still Doesnt Want To Start. 1 Out Of 10 Times It Will Run. It Wants To Foul The Plugs. Once It Is Running I Have Gotten It Up To Temperture And Timed It And Set The Load And Idle Maps. But It Will Not Start On Cranking?
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM