Microtech It was bound to happen...
02-19-03, 08:32 AM
#126
Despise Enmity
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 10sec rx7
The microtech will not self compensate for the larger injectors that have been fitted, it dosent know they have been fitted, you will need to adjust the computer,
95% of aftermarket computers are like this,
Dale
The microtech will not self compensate for the larger injectors that have been fitted, it dosent know they have been fitted, you will need to adjust the computer,
95% of aftermarket computers are like this,
Dale
What I am wondering is, if you change out the injectors, is there a setting for size in the LT8?
So if you change the size in program, does it change the values for the fuel map or would you have to reduce flow manually?
02-19-03, 04:08 PM
#127
Rotary Enthusiast
No there is not a injector size selection as such,
there is a blanket adjustment called mixtrim which when set to -10% will take 10% fuel out of the while curve, so if you replace your injectors that are 20% larger reduce this by 20% and check mixtures and fine tune from there.
Dale
there is a blanket adjustment called mixtrim which when set to -10% will take 10% fuel out of the while curve, so if you replace your injectors that are 20% larger reduce this by 20% and check mixtures and fine tune from there.
Dale
02-19-03, 05:37 PM
#128
Despise Enmity
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 10sec rx7
No there is not a injector size selection as such,
there is a blanket adjustment called mixtrim which when set to -10% will take 10% fuel out of the while curve, so if you replace your injectors that are 20% larger reduce this by 20% and check mixtures and fine tune from there.
Dale
No there is not a injector size selection as such,
there is a blanket adjustment called mixtrim which when set to -10% will take 10% fuel out of the while curve, so if you replace your injectors that are 20% larger reduce this by 20% and check mixtures and fine tune from there.
Dale
So is there any limit (or is just the mixtrim function) limited to <100% values?
So basically, if I am running 550cc injectors and I specify 1000cc injectors I can tune them down initially (presuming some number ~50% I'm not feeling math inclined at the moment...) to allow for greater ease in the future should I swap out the 550's with 4x720cc's or greater?
Thanks for your advice,
Joe
02-19-03, 07:02 PM
#129
Rotary Enthusiast
The sky is the limit, the mix trim's range is -99% to + 99%
so yes you fit larger injectors and work out the figure and go from there,
you dont have to use the mix trim function, you can re programe all the load points and leave the mix trim on 0% if you like.
Basically anything you want to do you can do,
Dale
so yes you fit larger injectors and work out the figure and go from there,
you dont have to use the mix trim function, you can re programe all the load points and leave the mix trim on 0% if you like.
Basically anything you want to do you can do,
Dale
02-25-03, 12:17 PM
#133
If you didn't commit yourself early enough, you didn't recieve an invoice. Did you subscribe to the list? I know Brandon left everyone on, even the people that got cut off for being too late.
02-25-03, 01:30 PM
#135
Glock Lover
Join Date: Mar 2001
Location: Currently residing in St Charles, MO
Posts: 2,223
Likes: 0
Received 0 Likes
on
0 Posts
You had to email brandon directly saying you were in, and giving him precise details about your setup. Then he updated the list of people every day the last week saying "these people were in"
Did you get that email from the list, naming everyone who was in? If not you werent fully subscribed. If you were getting that email, than you didnt directly email him when it came time to commit 100%.
Did you get that email from the list, naming everyone who was in? If not you werent fully subscribed. If you were getting that email, than you didnt directly email him when it came time to commit 100%.
02-25-03, 01:54 PM
#137
Glock Lover
Join Date: Mar 2001
Location: Currently residing in St Charles, MO
Posts: 2,223
Likes: 0
Received 0 Likes
on
0 Posts
Then there must have been a miscommunication somewhere,or an email was never sent to Brandon when he started taking the real deal orders. Sit tight though, another group buy should be soon.
02-26-03, 11:44 AM
#140
Yeah.. I think everyone jumped on after we hit 12 people. But it was sitting at 9 or 10 for half the time the GB was open. I don't feel sorry for the people that were waiting for the extra 65 bucks to come off.... (but I do for the peple trying to scrounge the money 
)
)
03-02-03, 06:32 AM
#141
Originally posted by kabooski
a little report on the drag race
The Most impressive Rex there for me
was a Silver 84
full body
had a rear muffler
looked like a street car
Till that bitch took off
10.24@133
and I "heard" it had a 12A
a little report on the drag race
The Most impressive Rex there for me
was a Silver 84
full body
had a rear muffler
looked like a street car
Till that bitch took off
10.24@133
and I "heard" it had a 12A
Yeah, assuming were talking about the same car, this guy has been around for a while
. DirectFreak took these pictures down in Florida (where you are as well), so I assume theres only 1 silver -SE with a 12A running 10 seconds down in that area .~T.J.
12A Runs 10 Second 1/4 Mile
03-17-03, 06:31 PM
#143
Laying Down Rotary Law
prob's after the WAR
currency rates are not going to be stable till after the war has ended..
and also not till Brad and Jon have recouped from the 1st GB LoL
currency rates are not going to be stable till after the war has ended..
and also not till Brad and Jon have recouped from the 1st GB LoL
03-17-03, 09:14 PM
#146
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: Tallahassee, FL
Posts: 1,402
Likes: 0
Received 0 Likes
on
0 Posts
Dude, if only you knew how right you were. :-P I'm gonna have nightmares of elementary school now... (and I get homicidal when people start talking about Marlon Brando )
Brandon
)Brandon
03-26-03, 03:41 AM
#147
Newbie
Join Date: Mar 2003
Location: Singapore
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
When's the next round?
Will there be another group purchase?
I'm very interested!!! Willing to pre pay!
email me please!!!
ilurbu@yahoo.com
David
NEWBIE from Singapore.
I'm very interested!!! Willing to pre pay!
email me please!!!
ilurbu@yahoo.com
David
NEWBIE from Singapore.
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM
