Microtech 0cyl test bypasses all settings?
0cyl test bypasses all settings?
Quick question:
When you start the 0CYL test does settings have anything to do with something not operating?
When I do the test, my primaries arent working.
The injectors all have 12v shared and secondaries are clicking.
Traced the wires and they are good up to the LT10S...
What am I missing?
Microtech is broke correct?
When you start the 0CYL test does settings have anything to do with something not operating?
When I do the test, my primaries arent working.
The injectors all have 12v shared and secondaries are clicking.
Traced the wires and they are good up to the LT10S...
What am I missing?
Microtech is broke correct?
You sure have it wired correctly? Your primaries should be triggered via Yellow and Yellow/black wires.
If yours is wired correctly and your primaries arnt firing with the 0cyl test they are either sized or your ecu has burnt drivers.
If yours is wired correctly and your primaries arnt firing with the 0cyl test they are either sized or your ecu has burnt drivers.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM