0cyl test bypasses all settings?
 

Quick question:

When you start the 0CYL test does settings have anything to do with something not operating?

When I do the test, my primaries arent working.

The injectors all have 12v shared and secondaries are clicking.

Traced the wires and they are good up to the LT10S...

What am I missing?

Microtech is broke correct?

You sure have it wired correctly? Your primaries should be triggered via Yellow and Yellow/black wires.

If yours is wired correctly and your primaries arnt firing with the 0cyl test they are either sized or your ecu has burnt drivers.