also poseted at
http://www.msextra.com/forums/viewto...p?f=67&t=40240


i installed 12v solenoids to opperate my 5/6 ports and my intake VDI. (s5 style) and want to drive their relays with the spare ports on my MS

i am using ms2 v3 i have installed the zeal card and wired according to diyautotune.com.

i connected wires from JS2 -> IN2 and JS0 -> IN3 on the zeal card. connected OUT2 -> spr2 and OUT3 -> spr3. wired from there to my solonoid. no trigger. im testing my out wire with a DMM checking for continuity to ground at the set rpm event but no dice yet. i am using tuner studio and im not exactly clear on the proper way to setup. i got the widows filled out rpm < 3500 hys 150.

if im doing something wrong please let me know. or if something may be damaged in my MS what components to check?

thanks
andrew

 

I got it working after Matt on msextra forum pointed out i forgot to jumper 12c and js9. It works

 

Could you post pic's, and maybe do a short wright up of your solenoid setup sounds really interesting.