which led controls T1 and T2 D14 is Leading correct ?

also for the cut tooth CAS i run the wires to NE- pin 24 and NE+ 7 ?

 

What coils are you running? FC coils don't have a T1/T2 output, one output is a trigger and another is a coil select. If you're using FC coils, then D14 is leading, D15 is coil select, and D16 is ignition trigger.

If you're not using FC coils, what I say probably does not apply, I only have experience with FC coils.

 

Im using 4 Bosch HEC 715's And 4 VB921's as ignitors ?

 

If you're using FD-style outputs, The LED closest to the serial port is leading, the LED furthest from the serial port is T1, and the LED in the middle is T2.

Ken

 

As per this with bosch hec 715 coils