what LED controls t1 and t2
 

which led controls T1 and T2 D14 is Leading correct ?

also for the cut tooth CAS i run the wires to NE- pin 24 and NE+ 7 ?

What coils are you running? FC coils don't have a T1/T2 output, one output is a trigger and another is a coil select. If you're using FC coils, then D14 is leading, D15 is coil select, and D16 is ignition trigger.

If you're not using FC coils, what I say probably does not apply, I only have experience with FC coils.

Im using 4 Bosch HEC 715's And 4 VB921's as ignitors ?

If you're using FD-style outputs, The LED closest to the serial port is leading, the LED furthest from the serial port is T1, and the LED in the middle is T2.

Ken

http://img511.imageshack.us/img511/1...putsnk8po2.png

As per this with bosch hec 715 coils