Megasquirt stock s4 t2 program
#1
Rotary Enthusiast
Thread Starter
Join Date: Mar 2007
Location: Pasadena
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
stock s4 t2 program
Hi, I was wondering if anyone had a stock program for a s4 t2 that I can have for my megasquirt setup
I blew my s4 t2 street ported engine recently. It had bigger injectors and bolt ons except upgraded turbo. My wiring harness is setup for the megasquirt, and I was just going to buy a used stock engine for now. I wanted to start the engine with a stock prgram, and tune it from there. Thanks
I blew my s4 t2 street ported engine recently. It had bigger injectors and bolt ons except upgraded turbo. My wiring harness is setup for the megasquirt, and I was just going to buy a used stock engine for now. I wanted to start the engine with a stock prgram, and tune it from there. Thanks
#2
I'm in rotary heaven!
Join Date: Dec 2006
Location: jax
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
This is a good place to start.
http://www.jaxrotaries.com/megasquirt/S4Turbo2.msq
Look at all the settings before you try to start the car.
I may have some things set up diffrent.
http://www.jaxrotaries.com/megasquirt/S4Turbo2.msq
Look at all the settings before you try to start the car.
I may have some things set up diffrent.
#4
I'm in rotary heaven!
Join Date: Dec 2006
Location: jax
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
I had got that same map from someone else quite a while ago.
There is alot of things set in there i'm personally not using like electric fan, wideban O2, high inp inj... etc...
as far as the timming it seems to be ok, untill i put the money up for some good injectors i cant play with it much... all i know is with a little bit of tweeking you can get basicly any stock s4 t2 running within 30 minutes with that map. But i'm not saying it's a plug and play, anyone willing to try it out must understand everything must be looked at and set accordingly before trying to start there car with it.
There is alot of things set in there i'm personally not using like electric fan, wideban O2, high inp inj... etc...
as far as the timming it seems to be ok, untill i put the money up for some good injectors i cant play with it much... all i know is with a little bit of tweeking you can get basicly any stock s4 t2 running within 30 minutes with that map. But i'm not saying it's a plug and play, anyone willing to try it out must understand everything must be looked at and set accordingly before trying to start there car with it.
#5
I'm in rotary heaven!
Join Date: Dec 2006
Location: jax
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
P.s. currently my turbo 2 is in the junkyard... the engine and trans is in my garrage... I bought a clean 88 GXL N/A auto trans for the swop. Here in about 3 weeks i'm going to start working on it. Scince I had it running in my old car it should be somewhat plug and play. easier than the first build now that i have all the parts and i know the engine runs. Living in florida with the rest of my family still up north means they visit alot, got family comming for the next few weeks so i dont want to touch the car till i can devote all my free time on everything. But it will get done!
Thread
Thread Starter
Forum
Replies
Last Post
Claudio RX-7
Haltech Forum
5
04-23-19 02:50 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM