Looking for some bridgeport tunes (NA), wanting to compare some tunes to what I currently have to troubleshoot a start and die issue,

 

Will get you one later this evening my time. I have a few that have been tuned on dyno.

 

Okay it's highly appreciated! What size injectors?

 

4 x 550 but because it's ve and your entering you Injectors it's scaled by your required fuel so should give you a idea will post in next hr or so

 

Great! I'm assuming it's a 4 port bridge that you have a tune for, mine is a 6 port but it should still start on the tune if I'm correct

 

yea is a 4 port 13bbp it's a ms1 map on 12x12 fuel table I believe. but you can save the table and scale it over your larger table depend on if you running 16x16.qill help anyways. just cooking kids dinner

 

this was the last one if i remember correctly.we only made 170hp atw on a dyno pack couldnt work out why so low on power until found exhaust was almost completely blocked with perforation from resonators collapsed.this ute had 55mm efi hardware throttle body

 

also i saved a map from a 6port bridgy but i didnt tune it,i just worked on it.had stock intake i remember that

 

I don't see the tune, is it posted? Then again I just woke up and it's 7:30 here so I may be over looking t lol

 

there's 2. msq files posted in last 2 posts. you will need to download attachment save them then load them into tunerstudio

 

Oh I see them now, I'm using the app so they wouldn't show, went onto the website and opened the thread and saw them, many thanks! I'll keep you posted

 

yea take them as a reference only they may help to steer you into right direction.

 

Will do, I just need a reference to get a start up and to get the car idling so I can break it in and go to my tuner

 

Here's another to play with. MS2, half bridge 4port 550ccx4

 

Here's an OLD Megasquirt 1 tune of EXACTLY the ports you are working with. If it's lean just increase the Req'd fuel. Don't apply it to your ECU though. You'll need to export the VE table and import it.

It might help.

But as I said, further replies to this issue will be in the other thread.