Megasquirt need help setting up boost controler on ms2 extra code 1.02
09-24-09, 08:00 PM
#1
Rotary Enthusiast
Thread Starter
iTrader: (8)
Join Date: Mar 2004
Location: Ontario
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
need help setting up boost controler on ms2 extra code 1.02
ok so the car runs supper supper great a little go good tho... im hitting 15 psi and she just wants to keep climbing so i need to enable my boost controller now so i dont kill my stock turbo!!
i have the wiring all setup but i cant find the boost controller settings in the software can i even use the control with the 1.0.2 firmware? and if so how do i go by enabling it and setting it up. i have spent 2 hours searching on here and google with no good resaults as it all points to firmware 2.0+
thanks for your help
Martin
i have the wiring all setup but i cant find the boost controller settings in the software can i even use the control with the 1.0.2 firmware? and if so how do i go by enabling it and setting it up. i have spent 2 hours searching on here and google with no good resaults as it all points to firmware 2.0+
thanks for your help
Martin
09-25-09, 09:07 AM
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
There is only once change necessary for the swap to the 2.x firmware from 1.x. Just move the 2nd VR wire from JP4 to JS10.
You will want to export your VE, AFR, spark and split table first. Not sure if you can export the warmup enrichment or other tables. Make a note of your accel enrichment settings. The new firmware will have to be set up again...
But remember, a boost controller cannot lower boost past what the wastegate will naturally achieve.
You will want to export your VE, AFR, spark and split table first. Not sure if you can export the warmup enrichment or other tables. Make a note of your accel enrichment settings. The new firmware will have to be set up again...
But remember, a boost controller cannot lower boost past what the wastegate will naturally achieve.
09-25-09, 01:58 PM
#7
Rotary Enthusiast
Thread Starter
iTrader: (8)
Join Date: Mar 2004
Location: Ontario
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
There is only once change necessary for the swap to the 2.x firmware from 1.x. Just move the 2nd VR wire from JP4 to JS10.
You will want to export your VE, AFR, spark and split table first. Not sure if you can export the warmup enrichment or other tables. Make a note of your accel enrichment settings. The new firmware will have to be set up again...
But remember, a boost controller cannot lower boost past what the wastegate will naturally achieve.
You will want to export your VE, AFR, spark and split table first. Not sure if you can export the warmup enrichment or other tables. Make a note of your accel enrichment settings. The new firmware will have to be set up again...
But remember, a boost controller cannot lower boost past what the wastegate will naturally achieve.
