Megasquirt Forum Area is for discussing Megasquirt EMS

Megasquirt Ms2 extra, staged & acc wizard

Thread Tools
 
Search this Thread
 
Old Nov 21, 2007 | 05:25 AM
  #1  
seanyt's Avatar
Thread Starter
Junior Member
 
Joined: May 2007
Posts: 13
Likes: 0
From: Ireland,Dublin
Ms2 extra, staged & acc wizard

I have the car running ms2/extra now .
it's running large streetport & evo viii 560cc injectors

I have staged injection coming in at 3000rpm.
and below 3 power seems crap. but above it,it seems to sing.

general moving back and forward and tap's on the throttle seem's hesitant.
so here's my acceleration wizard setting to compare with others running ms2/extra
tps based
rate (%/s) value(ms)
15.0 5.0
8.0 4.0
4.0 2.0
1.0 1.0

all other value same as the FAQ.

and should my ve1 table below 3 look completely different esp only running 2 injector's?
I'm using the base 6port ve table from the megamanual to begin with & change.

gradually getting the car mapped and enjoying it but it's a steep learning curve for everyone i guess.
Reply
Old Nov 21, 2007 | 09:16 AM
  #2  
muythaibxr's Avatar
MegaSquirt Mod
Tenured Member 15 Years
 
Joined: Sep 2004
Posts: 4,721
Likes: 1
From: Maryland
You may also need to adjust your timing... Often hesitation and running weak at low revs can be caused by timing.

Ken
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
Smokeyfb33
Old School and Other Rotary
10
Oct 1, 2015 12:10 PM
lnlreaper
2nd Generation Specific (1986-1992)
2
Sep 27, 2015 09:59 AM




All times are GMT -5. The time now is 06:44 PM.