Megasquirt mixing low and high impedance injectors
#1
Rotary Turbo
Thread Starter
mixing low and high impedance injectors
I'm running the stock high impedance 550s on ms2 v3, I have a pair of 1600 for the secondaries. Is it simple as putting them in with inline resistors and changing the setting to 1600 on the staging menu on tuner studio?
#3
SAE Junkie
iTrader: (2)
Even simplier. 1600cc injectors are 4.5 ohms which is high for a low Z injector. Low-Z is typically 2Ohms.
I have tested a pair of them on a V3.0 PCB driver and they do not burn anything out. Don't use resistors at all...
Stage them in at 75% duty, 5% duty hysteresis. They duties will be so short and so infrequent you will never have a problem.
I have tested a pair of them on a V3.0 PCB driver and they do not burn anything out. Don't use resistors at all...
Stage them in at 75% duty, 5% duty hysteresis. They duties will be so short and so infrequent you will never have a problem.
Thread
Thread Starter
Forum
Replies
Last Post