high do i need to know anything to run low imp injectors on the MS1 v3.0 driver circut ?

 

to run low-imp injectors you need to have built the flyback circuits. These are incorporated onto the V3 board itself, but in the instructions are listed as an optional component. I've added them on the MS's i've built just because you already get the components, its another couple min of work, but then you have the capability to do more with the MS. look at instructions 69 and 70 here: http://www.megamanual.com/ms2/V3assemble.htm

 

You do have to follow the tuning instructions for low impedance injectors in addition to building those circuits on the MS.

Ken

 

i have done all the flyback where is the tuning fo low im in the manual