Megasquirt Looking to get a MS what is good for my set up?
I am looking to get a MS for my car. I know my car is not set up properly right now and it is due to the past owners of my car. I just picked it up and I want to make my car right.
I am choosing MS because it is in the price range I can afford and I know someone with almost the same set up as mine and they are running a MS on his car. He had all good things to say about it.
Here is the current set up on the car. This is the way I bought it.
-6port s5 engine(unknown internals but engine was open already!) <-KDR verified it
-s5 t2 front cap
-s5 turbo w/exhaust manifold
-unknown LIM(Just ordered 6port turbo LIM Jap2la today)
-s5 na harness
-red round top injectors???
-n370 ecu
-n370 afm
-n370 pressure sensor
-all emissions removed and blocked off
-s5 na tranny/drive train
-unknown FMIC
-RB FCD<-- bad for car tricks ecu not enough gas at high boost!<- my opinion
-TurboXs bov
-TurboXs boost Controller
-2.5 down pipe
-str8 pipe to small silencer
-Apexi n1 cat back
I am choosing MS because it is in the price range I can afford and I know someone with almost the same set up as mine and they are running a MS on his car. He had all good things to say about it.
Here is the current set up on the car. This is the way I bought it.
-6port s5 engine(unknown internals but engine was open already!) <-KDR verified it
-s5 t2 front cap
-s5 turbo w/exhaust manifold
-unknown LIM(Just ordered 6port turbo LIM Jap2la today)
-s5 na harness
-red round top injectors???
-n370 ecu
-n370 afm
-n370 pressure sensor
-all emissions removed and blocked off
-s5 na tranny/drive train
-unknown FMIC
-RB FCD<-- bad for car tricks ecu not enough gas at high boost!<- my opinion
-TurboXs bov
-TurboXs boost Controller
-2.5 down pipe
-str8 pipe to small silencer
-Apexi n1 cat back
as far as I know MS 1 or 2 will work just fine.
My advice is to run the same MS as the guy you know, if you can get hands on help it would make it much easier.
I got most of my stuff from www.DIYautotune.com
My advice is to run the same MS as the guy you know, if you can get hands on help it would make it much easier.
I got most of my stuff from www.DIYautotune.com




