Could someone please help me out with the engine constants/ injector set-up.

I'm currently running a 2 injector set-up on a single control (batch fire I believe its called) and triggering off the leading coils. (This is somewhat like the article I found at http://not2fast.wryday.com/megasquirt/)

I'm thinking if I set for
1 injection per cycle (coil strike)
two stroke (fires every time)
0ne cylinder
one injector

all should be well

I really need some advice for the even/odd fire and the injector staging

If you guys could comment on this set-up I would really appreciate it.

Thanks
Brent

 

If you're only using 2 injectors, you don't need staging. You also don't need odd-fire.

I'd set it up for 2 injections per cycle
4 stroke
4 cylinders
2 injectors

Set your req_fuel based on your actual injector size, and an engine that's 2x bigger than you really have... so if you're at 1.2L, use 2.4L, at 1.3L, use 2.6L.

Use simultaneous as well instead of alternating.