Megasquirt differences in Aaroncake and DIY write ups
#1
differences in Aaroncake and DIY write ups
There are a couple of differences in Aaron's write up and the one that DIY did. I am getting ready to pull mine out and do the upgrades for ignition control on my 1979 12a Turbo with MSII 3.0. Got the Zeal card and CPS last week.
The write ups are similar but have some slight differences mostly due to building the second vr conditioner circuit. DIY uses 1k resistors and Aaron uses 4.7k. Is this due to Zeal daughter card extras needing more current?
Thanks,
Danny
The write ups are similar but have some slight differences mostly due to building the second vr conditioner circuit. DIY uses 1k resistors and Aaron uses 4.7k. Is this due to Zeal daughter card extras needing more current?
Thanks,
Danny
#2
Senior Member
Join Date: Oct 2008
Location: round rock tx
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
If using the zeal card you do not need to build the 2nd vr circuit. Use 4.7k resistors mounted in the pull up fashon to drive your coils. I would suggest upgrading to GM LS truck coils. They are cheap and throw a good spark. For this you will need to build a 4thignition circuit. Just need an input and build the led circuit in the proto area and fire it as COP in rx8 mode.
Good luck
Good luck
Thread
Thread Starter
Forum
Replies
Last Post
Mrmatt3465
Interior / Exterior / Audio
8
09-17-15 01:28 PM