Jim,

I’ll take the oil cooler duct, right side.

Jim

 

Sorry, it is a LEFT side...another of several mistakes today.

 

Close-up of Fan ****

 

@tomsn16 I'm looking for the small trim hole cover that goes on the rear interior pastic right below the rear strut towers. I think it covers the hole for the rear seatbelt hardware. I lost mine.

 

I only have Right side

 

They cover the hole were the backseat latch loops usually protrude.

Check with me in about one week if you can't find elsewhere.

 

Please quote me all-in for:

Heater grommets (new)
Door panel vent (assuming LHD)
Oil level sensor

Much obliged.

 

PM sent with details
Correct..door pnel vent is LHD

 

Description:

Still Available
Prices are plus shipping
All my parts may be returned if not satisfied
Pic #1
$25....Fan **** ( HVAC panel )
$25....Heater Firewall Grommet set (NEW).............................SOLD
$25.....93 Dash End Panel , Right
$25.....Tool Box Lid, left
$25......Tool Box Tray, left
$25.......ABS Pump shield
$25.......Charcoal Cannister
$25.......Door Panel vent.............................................. .....................SOLD
$25.......OEM Oil Filler Neck
$25 each....R or L Outside Triangle
Pic #2
$50 each....Aluminum Door Handle Pull, R or L, by NP BOOSTED
$50.............DIN BOX
$50.............Oil Cooler Duct, left
Pic #3
$75.......Oil Level Sensor............................................ .....................................SOLD
$75.......OEM Air Box Stands set
$75........Fuel Pressre Reulator, SX PERFORMANCE 15402

 

Aluminum Door Pulls

 

Ttt

 

I was saving this to get it 3D scanned, But If you want it: C$65 shipped.(USPS).






@neit_jnf

 

Hey Dave
1.. Don't need the tower cover.
2. Looking for lhd
94 Glove Box
94 Passenger Air Bag COVER (don't need air bag)
93+ Hood latch

 

ill take the oil left side oil cooler duct

 

Some folk up here have used the RHD hood latch and run the release cable to a location somewhere under the RHS glovebox, where they mounted the pull.

Rare to find a LHD '94 up here for parting out.

 

PM sent

 

Prices are plus shipping
All my parts may be returned if not satisfied
Pic #1
$25....Fan **** ( HVAC panel )
$25.....Tool Box Lid, left
$25......Tool Box Tray, left
$25.......ABS Pump shield
$25.......Charcoal Cannister
$25.......Door Panel vent
$25.......OEM Oil Filler Neck
$25 each....R or L Outside Triangle
Pic #2
$50 each....Aluminum Door Handle Pull, R or L, by NP BOOSTED
$50.............DIN BOX
$50.............Oil Cooler Duct, left
Pic #3
$75.......OEM Air Box Stands set
$75........Fuel Pressre Reulator, SX PERFORMANCE 15402

 

To the top

 

Still Available
Prices are plus shipping
All my parts may be returned if not satisfied
Pic #1
$25....Fan **** ( HVAC panel )
$25.....Tool Box Lid, left
$25......Tool Box Tray, left
$25.......ABS Pump shield
$25.......Charcoal Cannister
$50.......Door Panel vent
$25.......OEM Oil Filler Neck
$25 each....R or L Outside Triangle
Pic #2
$50 each....Aluminum Door Handle Pull, R or L, by NP BOOSTED
$50.............DIN BOX
Pic #3
$75.......OEM Air Box Stands set
$75........Fuel Pressure Regulator, SX PERFORMANCE 15402

 

I’ll take the din pocket

 

PM sent with payment details

 

Hey Jim,

I'll take the Door Panel vent (if it's still available - per your 05 Aug post it is, but I saw Dave claim it back on 12 Jul and your post slightly thereafter marked it as SOLD, so wasn't sure).

Thanks!

 

Still Available Aug 9
Prices are plus shipping
All my parts may be returned if not satisfied
Pic #1
$25....Fan **** ( HVAC panel )
$25.....Tool Box Lid, left
$25......Tool Box Tray, left
$25.......ABS Pump shield
$25.......Charcoal Cannister
$50.......Door Panel vent.............................SOLD
$25.......OEM Oil Filler Neck
$25 each....R or L Outside Triangle
Pic #2
$50 each....Aluminum Door Handle Pull, R or L, by NP BOOSTED
$50.............DIN BOX............................................... .............................pending
Pic #3
$75.......OEM Air Box Stands set
$75........Fuel Pressure Regulator, SX PERFORMANCE 15402

 

Still Available Aug 14
Prices are plus shipping
All my parts may be returned if not satisfied
Pic #1
$25....Fan **** ( HVAC panel )
$25.....Tool Box Lid, left
$25......Tool Box Tray, left
$25.......ABS Pump shield
$25.......Charcoal Cannister
$25.......OEM Oil Filler Neck
$25 each....R or L Outside Triangle
Pic #2
$50 each....Aluminum Door Handle Pull, R or L, by NP BOOSTED
$50.............DIN BOX
Pic #3
$75.......OEM Air Box Stands set
$75........Fuel Pressure Regulator, SX PERFORMANCE 15402
__________________