Cleaning out the hoard part 1 (FC + FD Parts)
For Sale1987 Mazda RX-7
Apr 30, 2024, 06:15 PM | Replies: 7 | Views: 1586
Description:
Got a lot of redundant or no longer applicable parts in the stash that I really should be rid of. The parts come from one 1987 SE I parted out (major crash damage), multiple S4 engines, an REW engine, and various bits collected from constantly changing plans. I'll be progressively digging through multiple spots I've got parts stored at, so there will be multiple listings. Feel free to request combined shipping/package deals between the listings.
DM for local pickup
Part 1:
1. Pair of S4T2 rotors - $800 pair, $450/ea
2. Turbosmart EFR BOV blanking plate - $20
3. Aeromotive A1000-6 FPR - $100
4. 2 x S4 EGR BOPs - $5/ea
5*. Aeromotive -8AN filter - $100
6*. Aeromotive 10 micron microglass filter element - $40
7*. Aeromotive 2" filter bracket - $10
8. Earls single remote oil filter mount + Wix 51515 filter - $25
9. 3 x FC oil filter pedestals - $20/ea
10. N350 S5 MAF - $80
*Note: will roll all the Aeromotive filter related items (5, 6, 7) into a combo package for $125
| Picture | Title | Part Category | Price | Part Description |
|---|---|---|---|---|
|
S4T2 Rotor Pair | Engine - Internals | $800 | Lowest compression 13B rotors at 8.5:1 Came out of a junkyard engine that popped a coolant seal. The carbon layer was so thorough that there's almost no rust on the rotors, save for some very minor rotor face pitting that I've included pictures of. Cleaned mainly with an ultrasonic cleaner, simple green, and green scour pads. One rotor is a D weight, the other is an E weight. The bearings might be worth replacing. Available separately ($450/ea) or as the pair ($800) |
|
S4 EGR BOPs | Engine - Intake/Fuel | $5 | Block off plates for the S4's EGR, works for both NA and turbo. Came off engines I tore down, so I have no idea of their origin. They are marked with letter A and B, so let me know if you have a preference, otherwise you're getting one at random. BOP A is 3/16" thick and made of normal steel while B is 1/8" thick and made of stainless steel. |
|
Earls single remote oil filter mount + Wix 51515 filter | Engine - Internals | $25 | Earls P/N 2277ERL. Cast model with 4 total ports, 2 inlet and 2 outlet, all are 1/2" NPT. There is currently only 1 NPT plug on the assembly because I was configuring my oil routing to be 1-in, 2-out, but I have the other plugs that came with and can dig them out. Never used, but out of box as usual. Filter comes with for free if you want it, but will probably influence the shipping cost because it's kinda large. Brand new, but a bit scratched from test fitting the assembly in the car. Wix P/N 51515, crosscompatibility with Fram PH8A filters (as well as any other MFG that uses that same P/N scheme) |
|
3 x FC oil filter pedestal | Engine - Internals | $20 | Stock FC oil filter pedestals, have 3 Lettered A, B, C in case you want a specific one, otherwise I'll throw you one at random. |
|
N350 S5 MAF | Engine - Intake/Fuel | $80 | N350 S5 MAF (NA), sensor only Never used it myself - I bought this on its own, then picked up an S5 airbox and intake tube with another MAF included, so I now have more than I need. |
|
Turbosmart EFR BOV blanking plate | Engine - Power Adders | $20 | Piece that blocks off the CRV in the event that you want to use an external BOV with an EFR. Came with an EFR I bought, but don't need the blanking plate. The o-rings seem cooked, so I have Viton replacements on the way that I'll include. |
|
Aeromotive A1000-6 FPR | Engine - Intake/Fuel | $100 | Fuel pressure regulator with 2 -6AN ORB inputs and one -6AN ORB out I never ran this regulator on my own car. Apparently the previous owner had used it for a bit with E85. Internals look good, just some corrosion on the spring like you would expect. |
|
Aeromotive -8AN Filter | Engine - Intake/Fuel | $100 | Part number 12347. -8AN male inlet and outlet. Outside diameter of the filter is 2". The default media that comes with this P/N is cellulose/paper. Never used, only ever took it out of the packaging and then disassembled it to check the filter media inside Can roll the filter, microglass element, and bracket into a combo for $125 |
|
Aeromotive Filter Media | Engine - Intake/Fuel | $40 | Part number 12650. 10 micron microglass element for -8AN filter housings. I bought this with the intention of swapping out the paper filter to run E85. Still brand new in the packaging Can roll the filter, microglass element, and bracket into a combo for $125 |
|
Aeromotive 2" Filter Bracket | Engine - Intake/Fuel | $10 | Part number 12701. Simple bent bracket meant to hold 2" filter elements, like the one I have. Out of the packaging, but never even installed on a car Can roll the filter, microglass element, and bracket into a combo for $125 |
Hi Vladee, looks like shipping is gonna be about $6, so $26 total. DM me if that works for you. Also just an FYI, those replacement o-rings are still on their way, so if you decide to buy it, it'll probably be some time next week when I can ship them out
Don't know if there's a proper way to do this, but prices have been dropped for whatever is still available:
1. Pair of S4T2 rotors -$800 pair, $450/ea $700 pair, $400/ea
2. Turbosmart EFR BOV blanking plate -$20 SOLD
3. Aeromotive A1000-6 FPR -$100 SOLD
4. 2 x S4 EGR BOPs - $5/ea
5*. Aeromotive -8AN filter -$100 SOLD
6*. Aeromotive 10 micron microglass filter element -$40 SOLD
7*. Aeromotive 2" filter bracket -$10 SOLD
8. Earls single remote oil filter mount + Wix 51515 filter -$25 $20
9. 3 x FC oil filter pedestals -$20/ea $15/ea
10. N350 S5 MAF -$80 $70
1. Pair of S4T2 rotors -
2. Turbosmart EFR BOV blanking plate -
3. Aeromotive A1000-6 FPR -
4. 2 x S4 EGR BOPs - $5/ea
5*. Aeromotive -8AN filter -
6*. Aeromotive 10 micron microglass filter element -
7*. Aeromotive 2" filter bracket -
8. Earls single remote oil filter mount + Wix 51515 filter -
9. 3 x FC oil filter pedestals -
10. N350 S5 MAF -
