RX7Club.com - Mazda RX7 Forum

Complete Part-Out '95 MB 2.0

For Sale

Old 06-23-23, 09:49 AM
  #101  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
Originally Posted by Narfle
Fog light harnesses? Specifically, I think there is an internal harness to the console switch. Thanks!
Sorry, do not have.
tomsn16 is offline  
Reply Like
Old 06-28-23, 01:59 AM
  #102  
Lives on the Forum

iTrader: (26)
 
Redbul's Avatar
 
Join Date: Mar 2015
Location: B.C.
Posts: 5,184
Received 1,252 Likes on 971 Posts
For s6 there is a short harness that runs out to the fogs from a shared plug coming out of the front harness. The wire that runs to the switch runs through the instrument harness (there may be a short harness within the shift surround console). How the circuit connects to the front harness, from the instrument harness, I don't know *. In any event if your car did not come with fog lights spec'd you may have to completely DIY a separate circuit. (* refer to separate wiring diagram manual)
Redbul is online now  
Reply Like
Old 06-28-23, 10:32 AM
  #103  
New to the Club!
 
Uttag's Avatar
 
Join Date: Jun 2023
Location: NM
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Sent you a msg on insta I'm interested in the fans
Uttag is offline  
Reply Like
Old 06-28-23, 11:00 AM
  #104  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
Originally Posted by Uttag
Sent you a msg on insta I'm interested in the fans
Sorry, I don't use insta....try to PM me?
tomsn16 is offline  
Reply Like
Old 06-28-23, 07:32 PM
  #105  
Junior Member


 
1badmofo's Avatar
 
Join Date: Jul 2016
Location: California
Posts: 44
Received 7 Likes on 7 Posts
By any chance do you have any of the self tapping stock front bumper Phillips screws would ya?
I’m putting a 99spec front bumper on my 93 and would like to have all correct parts and it’s missing 3 of them.

thank you,

Preston
1badmofo is offline  
Reply Like
Old 06-28-23, 08:49 PM
  #106  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
Originally Posted by 1badmofo
By any chance do you have any of the self tapping stock front bumper Phillips screws would ya?
I’m putting a 99spec front bumper on my 93 and would like to have all correct parts and it’s missing 3 of them.

thank you,

Preston
Not sure which screws?
Bumper cover-to-undertray/lip, bumper mount bracket-to-bumper cover, ??
tomsn16 is offline  
Reply Like
Old 06-28-23, 09:08 PM
  #107  
Junior Member


 
1badmofo's Avatar
 
Join Date: Jul 2016
Location: California
Posts: 44
Received 7 Likes on 7 Posts
I’m sorry about that, for the bumper mount to bumper cover. The 3 thin Phillips self tapers on the left and right sides.

thank you.
1badmofo is offline  
Reply Like
Old 06-29-23, 09:16 AM
  #108  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
Originally Posted by 1badmofo
I’m sorry about that, for the bumper mount to bumper cover. The 3 thin Phillips self tapers on the left and right sides.

thank you.
I searched and DO NOT have.....they always sell with bumper mount bracket sets.
tomsn16 is offline  
Reply Like
Old 06-29-23, 04:52 PM
  #109  
Full Member
iTrader: (2)
 
Braps's Avatar
 
Join Date: Jan 2021
Location: NY
Posts: 56
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by 1badmofo
I’m sorry about that, for the bumper mount to bumper cover. The 3 thin Phillips self tapers on the left and right sides.

thank you.
look up JP3 Motorsports. They have reproductions.
Braps is offline  
Reply Like
Old 06-30-23, 09:20 AM
  #110  
Rotary Enthusiast

iTrader: (10)
 
need-a-t2's Avatar
 
Join Date: Mar 2002
Location: binghamton, ny
Posts: 1,477
Received 311 Likes on 161 Posts
may have missed it, but do you have the front fender liners?
need-a-t2 is offline  
Reply Like
Old 06-30-23, 10:16 AM
  #111  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
Originally Posted by need-a-t2
may have missed it, but do you have the front fender liners?
You didn't miss.....liners are not listed because they sold (as many parts did) BEFORE we got the car home.
tomsn16 is offline  
Reply Like
The following users liked this post:
need-a-t2 (06-30-23)
Old 07-03-23, 09:25 AM
  #112  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
STILL Available July 3
$195...Spare tire with holder
$75.....Fuel tank trunk cover w harness
$125...Master window switch, dual auto down
$100...Mirror switch
$175ea..Door latches w cables
$165ea..Door window regulators
$50ea....Inside door handle

EXTERIOR
$95ea..Drip molds
$75ea..Beltlines
$100....Fuel Door
$45ea...Side markers
$40ea...Outside triangles
$75ea..Fender vents
$300....Right door

HARNESSES
$900...Front......very nice
$300...Firewall
$150ea..Door
$200...Rear

Weather Strips / Seals
$50ea..Door top
$30ea..Door lower
$85ea..Door window channel
$65......Hatch seal

ENGINE BAY
$225...AC compressor
$500....Throttle Body complete with TPS
$295....Fans
$100....Alternator
$500....ABS pump ( specific to '95 + cars
$200...Air pump control

DRIVETRAIN & UNDER CAR
$150ea..Axles
$200......PPF
$150......Tunnel heat shields
$175......Muffler heat shield
$250ea,,Rear Calipers
$200ea..Front Calipers
$225......OEM shifter
$950......Trans.....pick-up only
$175......Trans pan
$125.......Aluminum rear dust cover
$100.......OEM starter

SUSPENSION
$150ea..Front UCA's
$225ea..Front LCA's
$175ea..Rear UCA's
$225ea..Rear LCA's
$75ea...Toe links
$175ea..Front hubs
$200ea..Rear hubs
$250......Front subframe

$2000....BARE CHASSIS on rolling pallet with windshield, door glass and dash VIN plate........pick-up only

__________________
2in1 Group Buy
TNT Fuel starve elimin
tomsn16 is offline  
Reply Like
Old 07-05-23, 07:50 PM
  #113  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
bump
tomsn16 is offline  
Reply Like
Old 07-07-23, 08:45 PM
  #114  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
pic for Eemueekmu

tomsn16 is offline  
Reply Like
Old 07-08-23, 09:23 AM
  #115  
Junior Member
 
alexboomin's Avatar
 
Join Date: Jul 2023
Location: Saint Lucia
Posts: 11
Received 0 Likes on 0 Posts
Do you have front cross member? See pics below

See arrow

See arrow
alexboomin is offline  
Reply Like
Old 07-08-23, 10:44 AM
  #116  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
Originally Posted by alexboomin
Do you have front cross member? See pics below

See arrow

See arrow
Sorry, IC mount cross bar sold before we got the car home.
tomsn16 is offline  
Reply Like
Old 07-09-23, 09:00 PM
  #117  
Junior Member
 
fernando.hou's Avatar
 
Join Date: Feb 2022
Location: FL
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Interested on AC compressor
fernando.hou is offline  
Reply Like
Old 07-12-23, 09:32 PM
  #118  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
UCA's and Toe links....good boots, bushings, ball joints and NEW PILLOWS
Next off will be F & R LCA's
Last edited by tomsn16; 07-13-23 at 07:26 AM.
tomsn16 is offline  
Reply Like
Old 07-13-23, 08:27 PM
  #119  
Rotary Enthusiast

iTrader: (10)
 
need-a-t2's Avatar
 
Join Date: Mar 2002
Location: binghamton, ny
Posts: 1,477
Received 311 Likes on 161 Posts
how about the steering wheel clockspring?
need-a-t2 is offline  
Reply Like
Old 07-15-23, 09:53 AM
  #120  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
STILL Available July 15
INTERIOR
$195...Spare tire with holder
$75.....Fuel tank trunk cover w harness
$125...Master window switch, dual auto down
$100...Mirror switch
$175ea..Door latches w cables
$165ea..Door window regulators
$50ea....Inside door handle

EXTERIOR
$95ea..Drip molds
$75ea..Beltlines
$100....Fuel Door
$45ea...Side markers
$40ea...Outside triangles
$75ea..Fender vents
$300....Right door

HARNESSES
$900...Front......very nice
$300...Firewall
$150ea..Door
$200...Rear

Weather Strips / Seals
$50ea..Door top
$30ea..Door lower
$85ea..Door window channel
$65......Hatch seal

ENGINE BAY
$225...AC compressor
$500....Throttle Body complete with TPS
$295....Fans
$100....Alternator
$500....ABS pump ( specific to '95 + cars)
$200...Air pump control

DRIVETRAIN & UNDER CAR
$150ea..Axles
$200......PPF
$150......Tunnel heat shields
$175......Muffler heat shield
$250ea,,Rear Calipers
$200ea..Front Calipers
$225......OEM shifter
$950......Trans.....pick-up only
$125.......Aluminum rear dust cover
$100.......OEM starter

SUSPENSION
$150ea..Front UCA's
$225ea..Front LCA's
$175ea..Rear UCA's
$225ea..Rear LCA's
$75ea...Toe links
$175ea..Front hubs
$200ea..Rear hubs
$250......Front subframe

$2000....BARE CHASSIS on rolling pallet with windshield, door glass and dash VIN plate........pick-up only

__________________
2in1 Group Buy
tomsn16 is offline  
Reply Like
Old 07-20-23, 06:18 PM
  #121  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
Bump for many great parts
tomsn16 is offline  
Reply Like
Old 07-22-23, 01:24 PM
  #122  
Lives on the Forum

iTrader: (26)
 
Redbul's Avatar
 
Join Date: Mar 2015
Location: B.C.
Posts: 5,184
Received 1,252 Likes on 971 Posts
Please set aside the two front LCA for me. Will DM now.
Redbul is online now  
Reply Like
Old 07-24-23, 07:18 PM
  #123  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
pic for REDBUL


tomsn16 is offline  
Reply Like
The following users liked this post:
Redbul (07-25-23)
Old 07-25-23, 12:57 AM
  #124  
Lives on the Forum

iTrader: (26)
 
Redbul's Avatar
 
Join Date: Mar 2015
Location: B.C.
Posts: 5,184
Received 1,252 Likes on 971 Posts
How about those front and rear mounting bolts with the adjusting cams? For Version 4~ 6 cars?

Front (4 units) 28-664 = FD16-34-66ZB x 4
28-473 = FD16-28-473 x 4

Rear (2 Units) 28-664 = FD16-28-66ZA x 2
28-473 = FD16-28-473 x 2
Last edited by Redbul; 07-25-23 at 01:10 AM.
Redbul is online now  
Reply Like
Old 07-25-23, 02:00 PM
  #125  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (285)
 
tomsn16's Avatar
 
Join Date: Mar 2009
Location: Murfreesboro TN
Posts: 4,265
Received 504 Likes on 333 Posts
pic for Redbul

tomsn16 is offline  
Reply Like



Advanced Search

All times are GMT -5. The time now is 08:20 PM.