Complete Part-Out '95 MB 2.0

For Sale

Old Jun 23, 2023 | 09:49 AM
  #101  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
Originally Posted by Narfle
Fog light harnesses? Specifically, I think there is an internal harness to the console switch. Thanks!
Sorry, do not have.
Reply
Old Jun 28, 2023 | 01:59 AM
  #102  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,027
Likes: 1,680
From: B.C.
For s6 there is a short harness that runs out to the fogs from a shared plug coming out of the front harness. The wire that runs to the switch runs through the instrument harness (there may be a short harness within the shift surround console). How the circuit connects to the front harness, from the instrument harness, I don't know *. In any event if your car did not come with fog lights spec'd you may have to completely DIY a separate circuit. (* refer to separate wiring diagram manual)
Reply
Old Jun 28, 2023 | 10:32 AM
  #103  
Uttag's Avatar
New to the Club!
 
Joined: Jun 2023
Posts: 1
Likes: 0
From: NM
Sent you a msg on insta I'm interested in the fans
Reply
Old Jun 28, 2023 | 11:00 AM
  #104  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
Originally Posted by Uttag
Sent you a msg on insta I'm interested in the fans
Sorry, I don't use insta....try to PM me?
Reply
Old Jun 28, 2023 | 07:32 PM
  #105  
1badmofo's Avatar
Full Member
Veteran: Air Force
Tenured Member: 5 Years
 
Joined: Jul 2016
Posts: 68
Likes: 7
From: California
By any chance do you have any of the self tapping stock front bumper Phillips screws would ya?
I’m putting a 99spec front bumper on my 93 and would like to have all correct parts and it’s missing 3 of them.

thank you,

Preston
Reply
Old Jun 28, 2023 | 08:49 PM
  #106  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
Originally Posted by 1badmofo
By any chance do you have any of the self tapping stock front bumper Phillips screws would ya?
I’m putting a 99spec front bumper on my 93 and would like to have all correct parts and it’s missing 3 of them.

thank you,

Preston
Not sure which screws?
Bumper cover-to-undertray/lip, bumper mount bracket-to-bumper cover, ??
Reply
Old Jun 28, 2023 | 09:08 PM
  #107  
1badmofo's Avatar
Full Member
Veteran: Air Force
Tenured Member: 5 Years
 
Joined: Jul 2016
Posts: 68
Likes: 7
From: California
I’m sorry about that, for the bumper mount to bumper cover. The 3 thin Phillips self tapers on the left and right sides.

thank you.
Reply
Old Jun 29, 2023 | 09:16 AM
  #108  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
Originally Posted by 1badmofo
I’m sorry about that, for the bumper mount to bumper cover. The 3 thin Phillips self tapers on the left and right sides.

thank you.
I searched and DO NOT have.....they always sell with bumper mount bracket sets.
Reply
Old Jun 29, 2023 | 04:52 PM
  #109  
Braps's Avatar
Full Member
Tenured Member: 5 Years
iTrader: (2)
 
Joined: Jan 2021
Posts: 61
Likes: 2
From: NY
Originally Posted by 1badmofo
I’m sorry about that, for the bumper mount to bumper cover. The 3 thin Phillips self tapers on the left and right sides.

thank you.
look up JP3 Motorsports. They have reproductions.
Reply
Old Jun 30, 2023 | 09:20 AM
  #110  
need-a-t2's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Mar 2002
Posts: 1,724
Likes: 540
From: binghamton, ny
may have missed it, but do you have the front fender liners?
Reply
Old Jun 30, 2023 | 10:16 AM
  #111  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
Originally Posted by need-a-t2
may have missed it, but do you have the front fender liners?
You didn't miss.....liners are not listed because they sold (as many parts did) BEFORE we got the car home.
Reply
Old Jul 3, 2023 | 09:25 AM
  #112  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
STILL Available July 3
$195...Spare tire with holder
$75.....Fuel tank trunk cover w harness
$125...Master window switch, dual auto down
$100...Mirror switch
$175ea..Door latches w cables
$165ea..Door window regulators
$50ea....Inside door handle

EXTERIOR
$95ea..Drip molds
$75ea..Beltlines
$100....Fuel Door
$45ea...Side markers
$40ea...Outside triangles
$75ea..Fender vents
$300....Right door

HARNESSES
$900...Front......very nice

$300...Firewall
$150ea..Door
$200...Rear

Weather Strips / Seals
$50ea..Door top
$30ea..Door lower
$85ea..Door window channel
$65......Hatch seal

ENGINE BAY
$225...AC compressor
$500....Throttle Body complete with TPS
$295....Fans
$100....Alternator
$500....ABS pump ( specific to '95 + cars
$200...Air pump control

DRIVETRAIN & UNDER CAR
$150ea..Axles
$200......PPF
$150......Tunnel heat shields
$175......Muffler heat shield
$250ea,,Rear Calipers
$200ea..Front Calipers
$225......OEM shifter
$950......Trans.....pick-up only
$175......Trans pan
$125.......Aluminum rear dust cover
$100.......OEM starter

SUSPENSION
$150ea..Front UCA's
$225ea..Front LCA's
$175ea..Rear UCA's
$225ea..Rear LCA's
$75ea...Toe links
$175ea..Front hubs
$200ea..Rear hubs
$250......Front subframe

$2000....BARE CHASSIS on rolling pallet with windshield, door glass and dash VIN plate........pick-up only

__________________
2in1 Group Buy
TNT Fuel starve elimin
Reply
Old Jul 5, 2023 | 07:50 PM
  #113  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
bump
Reply
Old Jul 7, 2023 | 08:45 PM
  #114  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
pic for Eemueekmu

Reply
Old Jul 8, 2023 | 09:23 AM
  #115  
alexboomin's Avatar
Junior Member
 
Joined: Jul 2023
Posts: 11
Likes: 0
From: Saint Lucia
Do you have front cross member? See pics below

See arrow

See arrow
Reply
Old Jul 8, 2023 | 10:44 AM
  #116  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
Originally Posted by alexboomin
Do you have front cross member? See pics below

See arrow

See arrow
Sorry, IC mount cross bar sold before we got the car home.
Reply
Old Jul 9, 2023 | 09:00 PM
  #117  
fernando.hou's Avatar
Junior Member
 
Joined: Feb 2022
Posts: 6
Likes: 0
From: FL
Interested on AC compressor
Reply
Old Jul 12, 2023 | 09:32 PM
  #118  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
UCA's and Toe links....good boots, bushings, ball joints and NEW PILLOWS
Next off will be F & R LCA's

Last edited by tomsn16; Jul 13, 2023 at 07:26 AM.
Reply
Old Jul 13, 2023 | 08:27 PM
  #119  
need-a-t2's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (11)
 
Joined: Mar 2002
Posts: 1,724
Likes: 540
From: binghamton, ny
how about the steering wheel clockspring?
Reply
Old Jul 15, 2023 | 09:53 AM
  #120  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
STILL Available July 15
INTERIOR

$195...Spare tire with holder
$75.....Fuel tank trunk cover w harness
$125...Master window switch, dual auto down
$100...Mirror switch
$175ea..Door latches w cables
$165ea..Door window regulators
$50ea....Inside door handle

EXTERIOR
$95ea..Drip molds
$75ea..Beltlines
$100....Fuel Door
$45ea...Side markers
$40ea...Outside triangles
$75ea..Fender vents
$300....Right door

HARNESSES
$900...Front......very nice

$300...Firewall
$150ea..Door
$200...Rear

Weather Strips / Seals
$50ea..Door top
$30ea..Door lower
$85ea..Door window channel
$65......Hatch seal

ENGINE BAY
$225...AC compressor
$500....Throttle Body complete with TPS
$295....Fans
$100....Alternator
$500....ABS pump ( specific to '95 + cars)
$200...Air pump control

DRIVETRAIN & UNDER CAR
$150ea..Axles
$200......PPF
$150......Tunnel heat shields
$175......Muffler heat shield
$250ea,,Rear Calipers
$200ea..Front Calipers
$225......OEM shifter
$950......Trans.....pick-up only
$125.......Aluminum rear dust cover
$100.......OEM starter

SUSPENSION
$150ea..Front UCA's
$225ea..Front LCA's
$175ea..Rear UCA's
$225ea..Rear LCA's
$75ea...Toe links
$175ea..Front hubs
$200ea..Rear hubs
$250......Front subframe

$2000....BARE CHASSIS on rolling pallet with windshield, door glass and dash VIN plate........pick-up only

__________________
2in1 Group Buy
Reply
Old Jul 20, 2023 | 06:18 PM
  #121  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
Bump for many great parts
Reply
Old Jul 22, 2023 | 01:24 PM
  #122  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,027
Likes: 1,680
From: B.C.
Please set aside the two front LCA for me. Will DM now.
Reply
Old Jul 24, 2023 | 07:18 PM
  #123  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
pic for REDBUL


Reply
Old Jul 25, 2023 | 12:57 AM
  #124  
Redbul's Avatar
Lives on the Forum
Tenured Member: 10 Years
Community Builder
Community Influencer
Liked
iTrader: (27)
 
Joined: Mar 2015
Posts: 7,027
Likes: 1,680
From: B.C.
How about those front and rear mounting bolts with the adjusting cams? For Version 4~ 6 cars?

Front (4 units) 28-664 = FD16-34-66ZB x 4
28-473 = FD16-28-473 x 4

Rear (2 Units) 28-664 = FD16-28-66ZA x 2
28-473 = FD16-28-473 x 2

Last edited by Redbul; Jul 25, 2023 at 01:10 AM.
Reply
Old Jul 25, 2023 | 02:00 PM
  #125  
tomsn16's Avatar
Thread Starter
Lives on the Forum
Tenured Member: 15 Years
Liked
Loved
iTrader: (297)
 
Joined: Mar 2009
Posts: 5,204
Likes: 640
From: Murfreesboro TN
pic for Redbul

Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:46 AM.