RX7Club.com - Mazda RX7 Forum

3 Rotor 20B

For Sale

Engine - Complete

Jul 6, 2021, 03:21 PM | Replies: 3 | Views: 1964
  • Engine - Complete - 3 Rotor 20B - Used - 0 All Models - Boise, ID 83705, United States
  • Engine - Complete - 3 Rotor 20B - Used - 0 All Models - Boise, ID 83705, United States
  • Engine - Complete - 3 Rotor 20B - Used - 0 All Models - Boise, ID 83705, United States
  • Engine - Complete - 3 Rotor 20B - Used - 0 All Models - Boise, ID 83705, United States
bcool's Avatar
Rest In Peace Dave
Join Date: Feb 2004
Posts: 1,347
iTrader: (0)
Tenured Member 15 Years
 

  • Price
    $14,000
    • OBO
  • Location Boise, ID, 83705, USA
  • Condition Used
Description:

It's time to make way for new projects in my life. Listing my 3 Rotor Series A425. It was acquired over 10 years ago, but I believe this was a 60K KM original motor and I've only put less than 3,000 miles on it myself. This motor has never been opened. I did not do a compression test on it before it was pulled, but it was pulled in good running condition due to a turbo oil seal failure. I have rotated it and verified all apex seals are in-tact and springy. This motor will come with a beefy T-4 turbo manifold that is ceramic coated minus the wastegate dump. This motor will come as-is as far as what I've listed here but should be a perfect start to a swap or build. 

Other items include:
-Bosch 1600cc injectors with -8 AN rails 
-ACT Prolite flywheel
-Crinkle Black powder-coated intake manifold  
-Turbo oil feed line
-Oil Filter pedestal
-FD Throttle Body

I'm starting this at $14K OBO No trades.


 

Last edited by bcool; Jul 6, 2021 at 03:34 PM. Reply
Old Jul 8, 2021 | 03:05 PM
Share
  #2  
bcool's Avatar
bcool
Thread Starter
Rest In Peace Dave
Tenured Member 15 Years
 
Joined: Feb 2004
Posts: 1,347
Likes: 0
From: Idaho
Price adjusted to $12k OBO
Reply
0
Old Jul 20, 2021 | 07:09 PM
Share
  #3  
bcool's Avatar
bcool
Thread Starter
Rest In Peace Dave
Tenured Member 15 Years
 
Joined: Feb 2004
Posts: 1,347
Likes: 0
From: Idaho
Sold
Reply
0
Old Jul 22, 2021 | 12:31 AM
Share
  #4  
Luisdecks.S4's Avatar
Luisdecks.S4
Junior Member
 
Joined: Jul 2021
Posts: 9
Likes: 0
From: California
Originally Posted by bcool
It's time to make way for new projects in my life. Listing my 3 Rotor Series A425. It was acquired over 10 years ago, but I believe this was a 60K KM original motor and I've only put less than 3,000 miles on it myself. This motor has never been opened. I did not do a compression test on it before it was pulled, but it was pulled in good running condition due to a turbo oil seal failure. I have rotated it and verified all apex seals are in-tact and springy. This motor will come with a beefy T-4 turbo manifold that is ceramic coated minus the wastegate dump. This motor will come as-is as far as what I've listed here but should be a perfect start to a swap or build.

Other items include:
-Bosch 1600cc injectors with -8 AN rails
-ACT Prolite flywheel
-Crinkle Black powder-coated intake manifold
-Turbo oil feed line
-Oil Filter pedestal
-FD Throttle Body

I'm starting this at $14K OBO No trades.

Quick question for you, How were you able to determine that the apex seals were good ? l'm purchasing a 1988 rx7 next week and the engine has been sitting for 10 years as well. But the engine is still on the car. It was also running before it was garaged for 10 years. The oil is still good as it didn't leak a lot while it was sitting as well as the coolant. l am going to do a compression test on it once l get it delivered. I would like to know if the seals are good without having to tear the engine apart.
Reply
0
Back to Subforum
The NEW RX7 Marketplace
View Next Unread
WTB FC3S S5 Tail lights




Advanced Search

All times are GMT -5. The time now is 07:20 AM.