Description:

General Specifications

• 4 Injector Drivers
• 4 Ignition Drivers
• 4 General Purpose Output Drivers
• 1 Digital Inputs.
• Magnetic or Hall Cam and Crank Input
• High RF suppression.
• Low heat generation.
• Waterproof connector with gold plated contacts.
• Case material is durable anodized aluminium.
• Surface mount component circuit design.
• Temperature range -40 to 85 Celsius.
• Operating voltage 6 - 25 Volts.
• Reverse Battery Protection.

• Real-time online tuning
• Tune Analyzer.
• Data logging and analysis software.

• Full Sequential ignition (coil-on-plug)
• Directly connect to most OEM ignition systems
• Programmable ignition dwell
• Timing accuracy / resolution 0.2 degrees
• Dual 32X21 user definable tune maps.
• Dual Map trim control.

• Compatible with most OEM trigger systems.
• Magnetic, hall or optical cam & crank inputs.
• Automatic magnetic sensors calibration.
• Selectable trigger patterns for most engine manufacturers.

• Automatic battery voltage compensation.
• Injection resolution is 2 micro seconds.
• Dual 32X21 user definable tune maps.
• Dual Map trim control.
• Automatic Staged injection activation.

• 5 Standard inputs.
• 1 programmable digital inputs.
• 1 Wide band lambda inputs.

• 4 Selectable PWM / Digital. e.g. boost control.

• Closed Loop lambda control.
• Dual mode turbo anti lag (Drag or Rally).
• Dual mode RPM Limit (hard and soft).
• Two-Step rev limiter.
• Nitrous oxide control.
• Engine load idle-up control. (air con, power steering)
• Programmable sensor calibration tables.
• Acceleration enrichment.
• Deceleration fuel cut.
• Cold start and Warm start compensation adjustment.

• Unlimited logging to laptop computer.
• User selectable ECU parameters to log.
• Log to the EMS Plug n Play Mini Data Logger.