TE21 with a 13B rotary
#1
Can Post Only in New Member Section
Thread Starter
Join Date: May 2012
Location: South Orange County
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
TE21 with a 13B rotary
OK, I guess I will try this one more time. This will be the 3rd attempt of posting an introduction, I looked again to see if I had any posts and I didn't. Not sure what the problem has been but here goes. She is a 1970 Toyota Corolla TE21
Freshly built 13B GSLSE Street port 48 Downdraft IDA with Holly Blue Fuel pump. 5 speed transmission from gslse with brand new 6 puck clutch from Action Clutch
Racing Beat Muffler and custom exhaust system
That is the good, the bad is it basically needs everything else to stay on a track without tons of oversteer. The power is there, not the rest, and I mean it needs a lot so I was hoping this would be a good oulet. I will be honest, this site has a lot of rules, and I get why they are there, but I got so frustrated I have been on JNC most of the time because nothing seemed to post here and all the other stuff you need to do to check out other areas of the site seems a little stringent. But, I will give it this one last shot so before I post more, let's see if this works again. Name is Shane, live in California.
Freshly built 13B GSLSE Street port 48 Downdraft IDA with Holly Blue Fuel pump. 5 speed transmission from gslse with brand new 6 puck clutch from Action Clutch
Racing Beat Muffler and custom exhaust system
That is the good, the bad is it basically needs everything else to stay on a track without tons of oversteer. The power is there, not the rest, and I mean it needs a lot so I was hoping this would be a good oulet. I will be honest, this site has a lot of rules, and I get why they are there, but I got so frustrated I have been on JNC most of the time because nothing seemed to post here and all the other stuff you need to do to check out other areas of the site seems a little stringent. But, I will give it this one last shot so before I post more, let's see if this works again. Name is Shane, live in California.
#3
Can Post Only in New Member Section
Thread Starter
Join Date: May 2012
Location: South Orange County
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
Yeah, as you could probably tell I was getting a bit frustrated but password worked and thread posted this time so looks like I'm good to go.
#5
Can Post Only in New Member Section
Thread Starter
Join Date: May 2012
Location: South Orange County
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
TE21 is the model number for the 71' Corolla that my GSL-SE rotary is in. Also nicknamed peunuts and the later te27 models are nicknamed mangos.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM