From pistons to rotary
#1
tryingsomethingnew
Thread Starter
Join Date: Jan 2012
Location: D.C. area
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
From pistons to rotary
New to rotary, decided to give the piston/rod combo a break. My name is Corey, living in Virginia as of now. Honda's were my huge passion for a long time untill a friend of mine noticed that I was in pursuit of another project and he introduced me to the rx-7. I ended up finding one a few days later and picked it up fairly cheap. I will keep the "newb" posts to a minimum. I'm quite excited to get started, just gonna start with the s5 swap in the next week or so with a suspension setup and tire/wheel combo. There's tons of good info on here, can't wait to get my hands dirty! Forgot to mention it's an 88' NA. Any advice on where to start with a good tune in the DC, Metro area?
Trending Topics
#11
Full Member
Join Date: Mar 2007
Location: Richmond, VA
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Hello and welcome. I've picked up a few parts from rotary performance in Manassas. Its a really neat place with a lot of projects going on. http://www.rp-performance.com/
Have fun with your new car.
Have fun with your new car.
#13
tryingsomethingnew
Thread Starter
Join Date: Jan 2012
Location: D.C. area
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
well guys, ive came a long ways since i bought the FC, got the s5 turbo swap in. Now just looking for the body/frame harness/ and the harness for under the dash (that might be all one piece, not sure). once i get these i should have it atleast running. any sources for these parts?
#19
tryingsomethingnew
Thread Starter
Join Date: Jan 2012
Location: D.C. area
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
s5 turbo to s4 na swap
so, the swap was on hold for about a week, due to my lack of accurate knowledge obviously, but through some research ive finally found out how to make this swap work with alot less effort than i was first told. once i have the car running with no issues, ill consider doing a write up on how i did it. there may already be a write up, but im sure there are people out there who dont quite understand it all due to being so new to rotary, like me. ive been taking pictures through the whole process, ill post those as well. more info to follow.....
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM
Under PSI
3rd Generation Specific (1993-2002)
19
09-23-15 11:47 PM