My broken RX7
#1
Junior Member
Thread Starter
Join Date: Oct 2016
Location: New Zealand
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
My broken RX7
Hi. So here is my 1992 s6 single turbo FD3s
I have had it for a while now so there will be a few posts in quick succession
The day i picked it up
It has had a bit of a hit in the front and bent the rail and needs a rad support
Ill create a build thread soon for my progress pics.
I have had it for a while now so there will be a few posts in quick succession
The day i picked it up
It has had a bit of a hit in the front and bent the rail and needs a rad support
Ill create a build thread soon for my progress pics.
#6
Junior Member
Thread Starter
Join Date: Oct 2016
Location: New Zealand
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Oct 2016
Location: New Zealand
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Well, The day finally came,
finishing off the tune today.
All loaded up and ready to go.
Strapped down ready to slam some boost into it.
All in all the day went well.
Had a completely dead battery in the morning so had to pull the one out of my ute for the day.
Had a dead spot in the accel enrichment that took a bit to find.
once we started on power runs found that with the 7psi spring in the wastegate the backpressure in the manifold was opening the gate so the engine was only getting about 4 psi of boost
Added an extra spring and we were away.
Overall happy with the results and will be plenty of power for sunday drives.
Low boost 10PSI: 218KW (292hp) 341Nm (252lbft) ATW
High boost 14PSI: 256KW (343HP) 402Nm (297lbft) ATW
finishing off the tune today.
All loaded up and ready to go.
Strapped down ready to slam some boost into it.
All in all the day went well.
Had a completely dead battery in the morning so had to pull the one out of my ute for the day.
Had a dead spot in the accel enrichment that took a bit to find.
once we started on power runs found that with the 7psi spring in the wastegate the backpressure in the manifold was opening the gate so the engine was only getting about 4 psi of boost
Added an extra spring and we were away.
Overall happy with the results and will be plenty of power for sunday drives.
Low boost 10PSI: 218KW (292hp) 341Nm (252lbft) ATW
High boost 14PSI: 256KW (343HP) 402Nm (297lbft) ATW
Thread
Thread Starter
Forum
Replies
Last Post
MacNeil
1st Generation Specific (1979-1985)
6
03-28-11 08:59 PM
EnjoiPugs
2nd Generation Specific (1986-1992)
14
10-16-09 06:14 PM
apneablue
3rd Generation Specific (1993-2002)
4
06-18-05 10:41 PM
DCrosby
3rd Generation Specific (1993-2002)
20
02-03-04 04:18 PM