Fd3s build from Orlando
06-18-13, 09:34 AM
#1
Unlucky7
Thread Starter
iTrader: (1)
Join Date: Jun 2013
Location: Orlando
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Fd3s build from Orlando
Hey guys my name is Michael Lewo, from Orlando, I have a 1993 Rx7. Currently have a decently modified FD and a 1979 Corolla sr5 liftback. I dont know if im supposed to post mods here but I figured what the hell
1993 Rx7 (currently runs e85):
Motor:
Heavy Street port
Motor is dowell pinned with 2 additional pins.
Custom Oil catch can
Dual oil coolers
Single turbo Precision T67; 22.5 LB of boost
Turbonetics wastegate
Top mount intercooler
MSD ignition
Custom fuel rail
1600cc Primary injectors
2200cc Secondary injectors
Two Aeromotive 1000 fuel pumps ran through 3 inch line all the way down
Microtech computer
Currently only street tuned by Kilo Racing
We suspect its making between 550-600, more in the 570s range
Car runs E85 ONLY, not a big deal with a good amount of E85 stations around me.
Suspension:
Eibach lowering springs in the rear
Front Tein coilovers
Custom reinforced PP Frame.
Custom A-arms in the works currently
XXR 526, Front : 17X9 +25 + 5mm spacer / Rear: 17X10 +35
1993 Rx7 (currently runs e85):
Motor:
Heavy Street port
Motor is dowell pinned with 2 additional pins.
Custom Oil catch can
Dual oil coolers
Single turbo Precision T67; 22.5 LB of boost
Turbonetics wastegate
Top mount intercooler
MSD ignition
Custom fuel rail
1600cc Primary injectors
2200cc Secondary injectors
Two Aeromotive 1000 fuel pumps ran through 3 inch line all the way down
Microtech computer
Currently only street tuned by Kilo Racing
We suspect its making between 550-600, more in the 570s range
Car runs E85 ONLY, not a big deal with a good amount of E85 stations around me.
Suspension:
Eibach lowering springs in the rear
Front Tein coilovers
Custom reinforced PP Frame.
Custom A-arms in the works currently
XXR 526, Front : 17X9 +25 + 5mm spacer / Rear: 17X10 +35
06-18-13, 10:41 AM
#2
06-21-13, 08:03 PM
#5
Junior Member
Join Date: Jun 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Nice build definitely looks like it will have a lot of power. Not familiar though with how well rotary engines can take those power levels on a stock internal parts. Hopefully everything goes well for you.
06-22-13, 08:23 AM
#6
Unlucky7
Thread Starter
iTrader: (1)
Join Date: Jun 2013
Location: Orlando
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, sorry that was definitely meant to say 3/8*** INCH line *******
Dear god if I was running a three inch line I might flood the motor
Xene- Ya the rear end has held up pretty well so far, I'm debating about doing a cobra IRS rear end. And I have already gone through one transmission, im on my second stock transmission. However, in the meantime I hope to have my old transmission (lost 1st and 2nd) built by the time the new stock one gives out. The car also has machined rotors which helps.
Dear god if I was running a three inch line I might flood the motor
Xene- Ya the rear end has held up pretty well so far, I'm debating about doing a cobra IRS rear end. And I have already gone through one transmission, im on my second stock transmission. However, in the meantime I hope to have my old transmission (lost 1st and 2nd) built by the time the new stock one gives out. The car also has machined rotors which helps.
06-22-13, 08:36 AM
#7
Unlucky7
Thread Starter
iTrader: (1)
Join Date: Jun 2013
Location: Orlando
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
I still have quite a bit to go on the stance, and the wheels are only temporary until around December at which point Im going to order custom 18 inch Savini one-off wheels... cheaper then ya think ! For now these are the 17s currently on the car, 600 with good tires on them, I thought it was a decent deal lol.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
And these are my old wheels. One-off custom 19 inch I.D. Luxury wheels. 19X9.5 - 265/40/19 / 19X10.5 - 305/35/19
No pull, only a Fender roll. Wheels fit amazing.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]And these are my old wheels. One-off custom 19 inch I.D. Luxury wheels. 19X9.5 - 265/40/19 / 19X10.5 - 305/35/19
No pull, only a Fender roll. Wheels fit amazing.
[IMG]
[/IMG][IMG]
[/IMG]
Last edited by Michael Lewo; 06-22-13 at 08:41 AM.
Trending Topics
06-27-13, 10:57 PM
#13
Junior Member
Join Date: Jun 2013
Location: Vancouver Island
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
very nice car! new owner? or new to the site.. regardless this is a work of art! i bet its like the gravatron when you step on the gas you probably cant road trip very far, gotta hit up a gas station every 100k! haha
you probably cant road trip very far, gotta hit up a gas station every 100k! haha
06-28-13, 07:04 AM
#16
Unlucky7
Thread Starter
iTrader: (1)
Join Date: Jun 2013
Location: Orlando
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
@ Natex, good to hear, makes me feel much more comfortable about stating thats my power level without knowing 100% for sure ! And no road trips for me, the car probably gets 2-3 MPG... and yes, I am completely serious... I also beat the **** out of the car every single time I drive it, I mean thats the point of the car. lol. If anyone wants I just posted the car up in the FD build thread section, pictures galore soon to come.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM