Aussie FD owner!
#1
Braaaap Tshhhh!
Thread Starter
Aussie FD owner!
Hey guys,
Adam here from Sydney, Australia!
Thought I should join up here and see what the community is like!
I have lots of questions and love the extra reading material!
I have a Black 02' Type R Bathurst
Engine: Greddy SMIC, Apexi power FC, custom 3.5" Exhaust (Dolphin tip) with SMB Dump Pipe. Cheap bastard air box mod with K&N filter. Tuned at Ric Shaw roughly 235rwkw @ 13psi.
Wheels/Suspension: 19x9 +25, 19x10 +25 Advan RS-D's in Matte Black, Adjustable Bilsteins from factory!
Body: Work was done at Bodyform Sydney by Pete. Feed front bar, front and rear fenders, carbon side steps and sanai rear diffuser. Scoot replica bonnet. Rear wing, wiper and wiper spray nozzle deleted.
Future mods: T51r SPL
Adam here from Sydney, Australia!
Thought I should join up here and see what the community is like!
I have lots of questions and love the extra reading material!
I have a Black 02' Type R Bathurst
Engine: Greddy SMIC, Apexi power FC, custom 3.5" Exhaust (Dolphin tip) with SMB Dump Pipe. Cheap bastard air box mod with K&N filter. Tuned at Ric Shaw roughly 235rwkw @ 13psi.
Wheels/Suspension: 19x9 +25, 19x10 +25 Advan RS-D's in Matte Black, Adjustable Bilsteins from factory!
Body: Work was done at Bodyform Sydney by Pete. Feed front bar, front and rear fenders, carbon side steps and sanai rear diffuser. Scoot replica bonnet. Rear wing, wiper and wiper spray nozzle deleted.
Future mods: T51r SPL
Last edited by gsl-se addict; 02-09-12 at 07:31 AM. Reason: remove reference to other rx7 site
#4
Braaaap Tshhhh!
Thread Starter
Thanks guys!
Mckoper I'm not sure I understand what you mean? The kit is by FEED?
ps I'm 1/4 Polish :p awesome place, I visited my relatives in Krakow, soooooooo many hot girls and soooooooo much vodka!
Mckoper I'm not sure I understand what you mean? The kit is by FEED?
ps I'm 1/4 Polish :p awesome place, I visited my relatives in Krakow, soooooooo many hot girls and soooooooo much vodka!
#6
Rotary eXperimental
Join Date: Jun 2011
Location: Gdynia / Poland / Europe
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Hehe Krakow is a special place for events. Vodka and girls have the best
#7
Braaaap Tshhhh!
Thread Starter
It is a replica (A very good one) made by a body shop in Aus, but you can get it from plenty of places, Shine Auto Project also make replica kits at a decent price!
Trending Topics
#13
Junior Member
Join Date: Feb 2012
Location: Charlotte. Nc
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
Adam here from Sydney, Australia!
Thought I should join up here and see what the community is like!
I have lots of questions and love the extra reading material!
I have a Black 02' Type R Bathurst
Engine: Greddy SMIC, Apexi power FC, custom 3.5" Exhaust (Dolphin tip) with SMB Dump Pipe. Cheap bastard air box mod with K&N filter. Tuned at Ric Shaw roughly 235rwkw @ 13psi.
Wheels/Suspension: 19x9 +25, 19x10 +25 Advan RS-D's in Matte Black, Adjustable Bilsteins from factory!
Body: Work was done at Bodyform Sydney by Pete. Feed front bar, front and rear fenders, carbon side steps and sanai rear diffuser. Scoot replica bonnet. Rear wing, wiper and wiper spray nozzle deleted.
Future mods: T51r SPL
Adam here from Sydney, Australia!
Thought I should join up here and see what the community is like!
I have lots of questions and love the extra reading material!
I have a Black 02' Type R Bathurst
Engine: Greddy SMIC, Apexi power FC, custom 3.5" Exhaust (Dolphin tip) with SMB Dump Pipe. Cheap bastard air box mod with K&N filter. Tuned at Ric Shaw roughly 235rwkw @ 13psi.
Wheels/Suspension: 19x9 +25, 19x10 +25 Advan RS-D's in Matte Black, Adjustable Bilsteins from factory!
Body: Work was done at Bodyform Sydney by Pete. Feed front bar, front and rear fenders, carbon side steps and sanai rear diffuser. Scoot replica bonnet. Rear wing, wiper and wiper spray nozzle deleted.
Future mods: T51r SPL
#14
Braaaap Tshhhh!
Thread Starter
Thanks for the love! I'll take some bay shots, it's pretty standard! I have some questions to answer here! I'm searching for the ultimate air induction as well as some help on making air guides!
#15
Braaaap Tshhhh!
Thread Starter
Been a while!
Had to do a short movie when I was learning after effects, shot it on a D90 which is why the quality is average, and it was my first ever go at it, but I had a lot of fun anyway, as I got to have my car as the subject!
Vid:
https://vimeo.com/39383898
New Pic:
Had to do a short movie when I was learning after effects, shot it on a D90 which is why the quality is average, and it was my first ever go at it, but I had a lot of fun anyway, as I got to have my car as the subject!
Vid:
https://vimeo.com/39383898
New Pic:
Last edited by Enigmatic; 05-22-12 at 07:05 AM.
#20
Braaaap Tshhhh!
Thread Starter
Thanks guys!
New clutch this week, cannot wait! Can't put much power down or it just slips at the moment, so not fun, also on the look out for coil overs!
New clutch this week, cannot wait! Can't put much power down or it just slips at the moment, so not fun, also on the look out for coil overs!
#22
Braaaap Tshhhh!
Thread Starter
Hey guys, been meaning to get involved here a bit more.
Since my last post the car has undergone a lot of work, including a street port with RA Super Seals, plus a few bits and pieces like an Autoexe Brace, new tyres, BC Racing suspension, HKS intake, Bride seats and so on!
I recently had my car featured so I thought I would share it here!
Adam's Wide FD RX-7 - OFIM Blog
Since my last post the car has undergone a lot of work, including a street port with RA Super Seals, plus a few bits and pieces like an Autoexe Brace, new tyres, BC Racing suspension, HKS intake, Bride seats and so on!
I recently had my car featured so I thought I would share it here!
Adam's Wide FD RX-7 - OFIM Blog
Thread
Thread Starter
Forum
Replies
Last Post