Interior / Exterior / Audio Talk about interior and exterior mods including audio.

Where to pick-up the speed-pulse signal in 3rd gen ?

Old Apr 3, 2002 | 01:20 PM
  #1  
R2Germany's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 67
Likes: 0
From: Berlin, Germany
Where to pick-up the speed-pulse signal in 3rd gen ?

Where to pick-up the speed-pulse signal in 3rd gen ?
Reply
Old Apr 3, 2002 | 02:43 PM
  #2  
bklues's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 20
Likes: 0
From: Sundsvall, Sweden
Re: Where to pick-up the speed-pulse signal in 3rd gen ?

Originally posted by R2Germany
Where to pick-up the speed-pulse signal in 3rd gen ?
The speedometer sensor is located is located in the gearbox (drivers side). The connector is labelled C-08 in the wiring diagrams. It has two wires (green and orange) going into the emission harness. In connector X-16 (under the dashboard above your passengers feet) they go into the dash harness and change color: the green one becomes yellow/red and the orange one yellow/white.
In connector X-17 (behind driver's side kick panel) they go into the instrument harness and finally in terminals 3C and 3A into the instrument cluster unit.

As you can see, you'll plenty of places to pick up that signal.

/Bernd
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rotospectre
New Member RX-7 Technical
0
Sep 13, 2015 11:22 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:33 PM.