Interior / Exterior / Audio Talk about interior and exterior mods including audio.

Where to hide Amps?

Thread Tools
 
Search this Thread
 
Old 08-18-02, 10:49 PM
  #1  
Full Member

Thread Starter
 
ZenFox's Avatar
 
Join Date: Sep 2001
Location: Chicago
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
Where to hide Amps?

Hey all!

Well, I'm finally getting serious about upgrading my stereo, and have come to a roadblock. At the end, it looks like I'll have two amps, but I don't know where to hide them. I want to keep my car looking completely stock (with the exception of the radio head, and perhaps a touch or two), and I don't want to have a pair of amps just hanging out, sucking up trunk space.

So, any ideas on where I can tuck them out of the way? At this point, I'm thinking of putting 'em one of the storage bins...

-ZenFox
Old 08-18-02, 11:50 PM
  #2  
Full Member

Thread Starter
 
ZenFox's Avatar
 
Join Date: Sep 2001
Location: Chicago
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
Re: Where to hide Amps?

Originally posted by ZenFox

-ZenFox
It's a FC, btw.

-ZenFox

(Stealth bump(tm))
Old 08-19-02, 10:54 AM
  #3  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
yeah that might work in the bins... but you loose the bin.

A couple of other options, that use only a minmal space:

Right in back of the seats on the bin wall, is great for keeping them cool. Some times a little custom trim panel and some matching auto carpet and it looks like the factory put them there.

If they are thin or small enough under the seats works well too.

If they are long but not too wide, to the sides of the spare tire, or on either side behind the rear trim panels just behind the shock towers.

Between the bins under the fiberglass bin shell. If you remove the bins and look in there, there is actually a lot of wasted space and you should be able to fit many amps in there and them put the bins back in. The only draw back is that there is limited airflow in that area, so if you regularly over drive your system they can over heat.
Old 08-19-02, 02:08 PM
  #4  
Full Member

Thread Starter
 
ZenFox's Avatar
 
Join Date: Sep 2001
Location: Chicago
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by Icemark
Right in back of the seats on the bin wall, is great for keeping them cool. Some times a little custom trim panel and some matching auto carpet and it looks like the factory put them there.
Good idea! I'll check that out. I don't expect to be pushing them too hard (All I'm after is SQ, not SPL), so maybe between the bins for at least one of em might work.

-ZenFox
Old 08-19-02, 04:30 PM
  #5  
Full Member

 
Eric89GTU's Avatar
 
Join Date: Mar 2001
Location: Ann Arbor, MI, USA
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
I put one am in a storage bin, and one halfway beneath my seat (and halfway behind it). I never roll my seat all the way back, so it's not a problem. I don't use all the power the amps put out, so overheating isn't ever really a problem. If I were to do a good-looking install, that spot behind the seats looks like a good one.
Old 08-20-02, 05:13 PM
  #6  
Full Member

 
attomica's Avatar
 
Join Date: Mar 2001
Location: Dallas, Texas USA
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
I have a pretty good sized 4-channel a/d/s/ amp mounted right behind the driver's seat in the vertical suface that is the outer bin wall. great fit plus, I'm 6'4" and put my seat all the way back and there's still room for the heat sinks to do their job. Why not the passenger's side? Because I have a Sony 10-disc changer there.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post



Quick Reply: Where to hide Amps?



All times are GMT -5. The time now is 01:40 PM.