I'm looking to buy a gromet to feed wires through for the drivers side firewall. I'd like to find a gromet like the stock engine harness uses if possible. Anyone know where I can find such a thing?

Thanks,
Dan

 

JC Witney!

 

they only have the small rubber ones....I'm talking about the one that covers the wire for some distance after the hole....like the engine harness

BTW it's grommet haha

 

I would say, just go to the junk yard and ****** a few! I said "******"!

 

or look at the part catalog for our cars, get the part # and order it from Malloy

 

where i am running cables through is blocked from the factory, so there wouldn't be a stock one. It's smaller then the other grommets.

 

That's a really good question!

I did some quick Googling with no luck. I agree that the junkyard could be a good source - just go looking through cars until you find one that's the right size you want and everything. I'm sure there's a source for those things new, but I'm not sure where.

On my old TII, I did the drill holes/install grommet for extra wiring. The wires were wrapped in nylon loom and tape, and were a tight fit at the grommet. Worked well, but I doubt I could have easily removed the harness the way I did it.

Dale

 

Dale,
I spent like an hour trying to find a place that sells something similar. I'd rather not go looking around a junk...but if I have to i'll go this weekend I called McMaster car and the lady wasn't very helpful.

-Dan