rzograbian

i got these so far:


also, i got the lexan cover and the light housings. i am wondering if the brackets that are included in the kit are the brackets for the light housings or will i have to buy those too?


thanks for all your help in advance!

unvmyrx7

iTrader: (14)

i bought those same pods from jay sheih. you will need the metal bracket that the lights bolt on to. also if you buy the hella 90mm lights, you will have to cut the pods. they are longer than the ipf lights that re amemiya used before. these pods are re amemiya replicas. you can check chuck's site rotaryextreme for installation pics of his sleek light kit. he modify the pods in his kit. i know all this, because i have that kit too.

rzograbian

thanks

Montego

iTrader: (1)

Where you get those? How much? if you don't mind me asking.

vchacon

ebay I believe. rzograbian where you get the lexan cover? I've been thinking of doing these as well. Take lots of pictures?

Victor

cruiser

A guy was selling these on this forum for $110.
Probably a nice starting point, but I was worried tbat I wont be able to get the lexan cover around here.

h20scorpio

would definatly get that for 110. Good buy.
JDM ones are too expensive;(

rzograbian

i will take lots of pics. the guy selling them has a lot of them and if i get enough buy's, i can get them cheaper. i dont think that the price is $110 because i just spoke to him and he said $150 and about $15 shipping. thats $165 which is a good price too!! if anyone is intrested in these kits, tell me so i can talk to him.

also, when i install, i will take lots of pics. as for the laxan, i can get the covers really easily because i know people who have access to it. if you want, i can peice together a kit or tell you where i get them from if there is enough intrest!! pm me if your intrested.

tookwik

What do you do about connecting the lights? How did you convert from the single H4 bulbs to the dual new bulbs? Thats the issue I'm facing right now so any help would be well appreciated.

fd3s777

iTrader: (3)

Wow... Found my product here. Ya I sold many of these headlight kit on ebay. I was planning to make a 3Dcover for it with acretic material. Turn out I have to spend USD$3000 for the metal molding. It is done by metal mold pressing. They want min order of 500 sets. I don't think I'll be able to sale 500 sets. I still have 8 sets of the base kit left. jay@evo-r.net

rotoboy661

hey man!! u bought them already???
wow that was fast!!!

ok u need these:

1.brakets to mount ur projectors (just trace mine out on to cardboard)

2. projectors ( 1 set high beam and one set low beams)

3.lexan sheets (.040-.080)

4. wiring harness for bulbs

5. bulbs (h9)

6.springs for adjustments

7.and nutz and bolts

i think thats it...oh a dremel is great for the cutting task!!!!

heres a pic of everything :

http://cgi.ebay.com/ebaymotors/ws/eB...category=33710

hope this helps

thanx
mike

rotoboy661

heres mine:

http://f2.pg.photos.yahoo.com/ph/rot...&.dnm=ecd8.jpg

http://f2.pg.photos.yahoo.com/ph/rot...&.dnm=be14.jpg

tookwik

For those who pieced the kit together seperately, how do you convert from the single H4 bulb to the dual H9 bulbs?

user 9348703

You could always get the RE-Amemiya H11 and or HID upgrade kit and it will go straight it, as long as the pods were made the same.

darkside7

iTrader: (12)

fd3s777 just pm'd you