waxing a car :) vid/pics
Thread Starter
Rotor DEMON !
Joined: Nov 2002
Posts: 1,074
Likes: 0
From: alberta canada/soon to be cape coral FL:D
waxing a car :) vid/pics
heres a vid of me detailing my friends cars with before and after pics. need divx for the vid. go here to get it if you dont have it http://download.com.com/3000-2139-10...ml?tag=lst-0-6
http://www.rx7.shawbiz.ca/upload/clean.avi
before on left after on right

joel
http://www.rx7.shawbiz.ca/upload/clean.avi
before on left after on right

joel
Thread Starter
Rotor DEMON !
Joined: Nov 2002
Posts: 1,074
Likes: 0
From: alberta canada/soon to be cape coral FL:D
haha it was for a diff forum scott.
i used. all mothers stuff
1.mothers clay bar.
2. moths sratch remover polish.
3. sealer/glaze
4.pure carbuna wax(with no cleaning agents in it at all).
joel
i used. all mothers stuff
1.mothers clay bar.
2. moths sratch remover polish.
3. sealer/glaze
4.pure carbuna wax(with no cleaning agents in it at all).
joel
NICE vid!!
Have you used any other products like Zaino?
How long does that Mothers wax last?
and this is just a question not a flame, but I thought the technique for using a claybar was to have a wet/soapy surface and roll the bar over the surface???
Have you used any other products like Zaino?
How long does that Mothers wax last?
and this is just a question not a flame, but I thought the technique for using a claybar was to have a wet/soapy surface and roll the bar over the surface???
Thread Starter
Rotor DEMON !
Joined: Nov 2002
Posts: 1,074
Likes: 0
From: alberta canada/soon to be cape coral FL:D
Originally posted by 7racer
NICE vid!!
Have you used any other products like Zaino?
How long does that Mothers wax last?
and this is just a question not a flame, but I thought the technique for using a claybar was to have a wet/soapy surface and roll the bar over the surface???
NICE vid!!
Have you used any other products like Zaino?
How long does that Mothers wax last?
and this is just a question not a flame, but I thought the technique for using a claybar was to have a wet/soapy surface and roll the bar over the surface???
with the clay bar. in the vid you migth see me spary soemthgin onthe car that is the lubercation for the clay bar. it comes in the mothers clay bar kit
. also the stuff that you use as a lub can also be sprayed on for a quick shine up if you only got a few water spots or somthing like that. i have yet to try something new. guess its cause i know that this works lol. i migth give it a shot later on tho.
thanks for watchign it tho
. if you got any more q's just ask joel
Well to be honest, as a professional detailer myself I would have to say nice work. And when you go to wash it again when it gets dirty, just rinse it with water and give a slight scrubbing if needed with no soap. Because you already waxed it and everything you don't need to wash since it has that protective film on it already. If you wash it, you will remove all that wax and everything off of the car which will defeat the purpous of you waxing the car in the first place. Nice job Joel!
-Jon
-Jon
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
Sep 2, 2015 09:42 PM
smikels
2nd Generation Specific (1986-1992)
3
Aug 18, 2015 01:26 PM



