Interior / Exterior / Audio Talk about interior and exterior mods including audio.

trunk lid /hatch in carbon fiber

Old 07-10-14 | 07:35 AM
  #1  
R-R-Rx7's Avatar
Thread Starter
Rotor or no motor
iTrader: (24)
 
Joined: Oct 2006
Posts: 3,411
Likes: 416
From: Limassol, CYPRUS
trunk lid /hatch in carbon fiber

I have been debating whether the carbon hatch is worth the hassle for a car that sees The track often but it is also a street car

I have seen the seibon in person. While I have never been a fan of the seibon products fitment was spot on. I dont know the weight of the seibon (given that seibon carbon products tend to be much heavier than the other more "exotic" brands)

The only thing I didnt like about the seibon is that if you attach the oem shocks, the hatch bends where the shocks are attached on the hatch

I figured to check other brands such as re amemiya which is offered in dry carbon.
Re amemiya also claims that same problem will occur with their dry carbon version

Does anyone have similar experience with carbon hatch? Do you just use weaker shocks? If so, anyone has a part number and share your experience?
Old 07-11-14 | 12:23 AM
  #2  
rlee429's Avatar
Chocobutt
iTrader: (25)
 
Joined: Sep 2003
Posts: 685
Likes: 2
From: sf
I say don't do it, I purchased a carbon fiber from a vendor and it does flex a lot. I have a wing installed on it as I am driving it makes extra noise, like it's rubbing something...

Also I haven't found a pair of shocks that didn't flex the hatch either.. one time on a hot day it lifted it 3/4". Also over time the area the shocks mount to will crack the hatch as well.
Old 07-11-14 | 05:08 PM
  #3  
Slideways FD's Avatar
Senior Member
iTrader: (13)
 
Joined: Sep 2006
Posts: 304
Likes: 2
From: Hawaii
for my seibon i just took off the shocks so its a bit of a pain to open the hatch...but i rarely ever open it since theres not much space left after a sub and amp.

the plastic covers dont fit on the seibon either
Old 07-11-14 | 07:25 PM
  #4  
R-R-Rx7's Avatar
Thread Starter
Rotor or no motor
iTrader: (24)
 
Joined: Oct 2006
Posts: 3,411
Likes: 416
From: Limassol, CYPRUS
Very interesting observations from both of you. Thank you

I have been thinking whether I should get the one from australia ad it came on the sp models. The I.pollard carbon. Not sure if its gonna be the same story with that one though


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:54 PM.