ok i though i could wire in a cd play with the stock speakers and just remember the color code for each then i cut the wires off the back of the stock radio and just started hooking up the wires and nothing works is thier any type of relays from the speakers that would not let it have direct connection from the speakers to the cd player? and the cd player is Max Output 60w (4 ch) and you know the stock speakers are Max 25w . Would this blow the stock speakers??? i just though i could do this myself instead of taking it somewhere

 

you'll need the diagram found here :
https://www.rx7club.com/forum/showth...threadid=25090

If you have a bose system you'll need a Bose/Schosche Adapter found here:
https://www.rx7club.com/forum/showth...threadid=25090

good luck

 

can i just take 10 guage wire and wire it directly?

 

oh wait 2 more questions

1. The power source says to hook it upto the ignition. how the hell do i do that because it needs something that turns of with the car. could i just hook it upto the cig lighter???

2. the Memory says just 12 volt so can that just be to batt???

 

Assumptions are the mother of all f^%k ups. Id recommend taking it somewhere and getting them to bail you out of this disaster, dont be suprised tho if the labor is now $30 or so more than it would have been if you didnt mess with it. Sorry to be blunt, but if you havent a clue, then you shouldnt be attempting it

 

Yeah, what he said. ^

 

hmmm well thanks for the help though

 

Didnt want to sound like an ***, if you were local Id help you, but its gonna be pretty differcult for me to educate you in 13 years of car audio professional installation experience in 5 minutes

 

no its ok i just thought i could direct connect it im not looking for permanent install i just want some sound untill i get professional thats why im talking about stock speakers i gots good speakers i just want temporary untill i get an amp. i just wanted some help like with the questions above

 

Probably should've used a harness...

 

well u could check to see if u blew any fuses, u made sure to disconnect the battery b4 u did this right?

 

i got it working, just rewired everything now its great

 

did u have to pull off all the trim to rewire everything?

 

no i hid it pritty well no one can see one wire or find one and didnt remove anything

 

oh, so you didn't have to remove the old wiring? i'm planning on redoing the wiring too, but i was going to remove the old stuff too, i guess there is no point in removing it...

 

i would want to come over to help but you live too far away sorry