suggestions or pics of changes intended
suggestions or pics of changes intended
hiya forum guys,
Pretty much have the perfomance stuff worked out on my car (94 R2). Inspired by Gordon M/ Pure RX7/ Kai's car/black burnout car and a few others I''ve decided it's time to make it pretty. Car is going in at end of month for paint/interior and some mild customization and I was looking for some feedback or experiences some of you may have had (good or bad) on some of my plans/ideas. In no particular order:
-remove antenna and rear parking lens weld holes smooth
-remove all badging and emblems possibly remove and fill rear hatch lock
-99 front end.....oh but what to do with that license plate holder???? 99 rear tailights already on car...possibly tinkering with the idea of fabbing a sheet metal (to match body) middle (eliminating middle light) in between rear tails. Anyone do this yet?
-Auto Power race roll bar (other suggestions welcome) ???bolt in or weld? help! and if I put this in do I need the axiom harness bar or is that uneccessary?
-cover interior plastic (have all brand new still in boxes every piece!) in alcantara (dash, console,headliner, a-pillars and maybe door panels.
-custom design new gauge graphics (simplify)
- I will not have a carpet in the interior. removing all factory sound deadening crap respraying interior possibly installing aluminum floor plate on passenger side.
-re-locate AC and heater controls to lower half of console hidden by OEM flip up door. I do not have a stereo or music system of any kind planned to be installed.
-dual SPA gauges (2): boost/water temp & oil temp/ fuel pressure placed in console where temp dials were.
-harness belts (car is a driver and road/track car NO auto x or dragging)
-polish out curbed rims (RE amimiya) maybe powdercoat centers???
-RE old style rear diffuser
-respray car (currently silverstone) but considering doing something different like a 2 tone pewter and silver combo....bored of the stock colors!!!
-possibly considering steel rear fender flares...burnout or something not sure about hacking up the rear 1/4 panel. Input experiences please on this
-has anyone noticed that FD's are one of the few modern cars with the rear view mirrors attached to the body?? I think it would look better with them attached to the door where the sail panel is. I think the Ganador mirrors do this but I'm not wild about their style any suggestions or pics of alternative mirrors. I like the skinny stalked CF (forget the brand) mirrors style.
-anyone paint the door handles/window trim to match their body color...how would that look?
-replace hatch with spoilerless OEM hatch (already have it)
-OEM alum scuff plates (have those new as well) worried about getting all dinged up. They don't seem to hold up well. Any suggestions?
-tint rear and side windows.
-the ONLY hood I would consider is the Mazda Speed hood but I don't think it can be had anymore.
did I forget anything? tell me what's silly and what works. I will document all progress with pics for your pleasure and my torture. Anyone want to help me tear it down? I'm in the bay area could be fun....
cheers,
frank
Pretty much have the perfomance stuff worked out on my car (94 R2). Inspired by Gordon M/ Pure RX7/ Kai's car/black burnout car and a few others I''ve decided it's time to make it pretty. Car is going in at end of month for paint/interior and some mild customization and I was looking for some feedback or experiences some of you may have had (good or bad) on some of my plans/ideas. In no particular order:
-remove antenna and rear parking lens weld holes smooth
-remove all badging and emblems possibly remove and fill rear hatch lock
-99 front end.....oh but what to do with that license plate holder???? 99 rear tailights already on car...possibly tinkering with the idea of fabbing a sheet metal (to match body) middle (eliminating middle light) in between rear tails. Anyone do this yet?
-Auto Power race roll bar (other suggestions welcome) ???bolt in or weld? help! and if I put this in do I need the axiom harness bar or is that uneccessary?
-cover interior plastic (have all brand new still in boxes every piece!) in alcantara (dash, console,headliner, a-pillars and maybe door panels.
-custom design new gauge graphics (simplify)
- I will not have a carpet in the interior. removing all factory sound deadening crap respraying interior possibly installing aluminum floor plate on passenger side.
-re-locate AC and heater controls to lower half of console hidden by OEM flip up door. I do not have a stereo or music system of any kind planned to be installed.
-dual SPA gauges (2): boost/water temp & oil temp/ fuel pressure placed in console where temp dials were.
-harness belts (car is a driver and road/track car NO auto x or dragging)
-polish out curbed rims (RE amimiya) maybe powdercoat centers???
-RE old style rear diffuser
-respray car (currently silverstone) but considering doing something different like a 2 tone pewter and silver combo....bored of the stock colors!!!
-possibly considering steel rear fender flares...burnout or something not sure about hacking up the rear 1/4 panel. Input experiences please on this
-has anyone noticed that FD's are one of the few modern cars with the rear view mirrors attached to the body?? I think it would look better with them attached to the door where the sail panel is. I think the Ganador mirrors do this but I'm not wild about their style any suggestions or pics of alternative mirrors. I like the skinny stalked CF (forget the brand) mirrors style.
-anyone paint the door handles/window trim to match their body color...how would that look?
-replace hatch with spoilerless OEM hatch (already have it)
-OEM alum scuff plates (have those new as well) worried about getting all dinged up. They don't seem to hold up well. Any suggestions?
-tint rear and side windows.
-the ONLY hood I would consider is the Mazda Speed hood but I don't think it can be had anymore.
did I forget anything? tell me what's silly and what works. I will document all progress with pics for your pleasure and my torture. Anyone want to help me tear it down? I'm in the bay area could be fun....
cheers,
frank
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Devon300zx
2nd Generation Specific (1986-1992)
15
Sep 16, 2015 06:57 AM



