How the f@ck do i take this **** out???
Trying to take out the deck in a 1993 RX-7 (3rd gen)
Can anyone lead me to any "How to's" or pictured instructions??

Iam so pissed right now I can ram this car to a f@ckin wall.

Help Please???


Thank U in advance

 

You should have searched. This question comes up at least once a month. There is a search funtion on this forum right up in the top right side of the page, right under the picture of the car.

In addition it is very easy to remove the stock radio. You will need to go to your local auto parts or car stereo store and get a set of Blaupunkt/ Ford radio keys.

Remove the small rubber stoppers (if your car has them) from each corner of the radio. insert the Blau/Ford keys until they lock, then pull out the radio, being careful to unplug the connections before yanking too far.

And profanity such as you used in your plea for help doesn't help anyone want to help you.

 

Thanks for nothing bud.

I dont live on my computer all day.
As far as my profanity goes. F@ck u.

 

Ahhh I can tell why you didn't get any help...

Well then since I actually didn't tell you how to remove the radio, what you really want to do is:

remove all the ***** in the center console, including the shift ****. Then carefully pry the entire panel up. Its all snap in. With it pried up you should be able to reach the release screw on the back of the radio, Its a 10 mm so you will need a small wrench. once the screw is out then you can lift the back of the radio up to unlock it from the dash assembly. The lower brace snaps right out.

You'll be able to get the plugs right out then.

then you can go play

 

thank u sir

umm i already removed the cassete deck

now the cd player is what i need to remove.
its a pain in da butt.

 

You did say deck in your first post smart guy. Good, luck its a real pita.

 

Angry white boy.......but suprisingly polite!

 

white boy?
elaborate