Need Pic of the 99 J-Spec wing
Thread Starter
Senior Member
Joined: Feb 2002
Posts: 705
Likes: 0
From: Southern California-Glendale
Need Pic of the 99 J-Spec wing
I have decided that exterior wise I want to go straight up 99 JSpec...I was originally thinking going with veilside C2 but I figure I'm gonna scrape too much and lower the value of the car. I am shooting for a dynoed, reliable, cool running 12 second RX-7. I talked to Rotary Power and they said they can help me a lot with my project and it's very possible.
Rotary Master
Joined: Feb 2001
Posts: 356
Likes: 1
From: Somewhere
Rotary Master
Joined: Feb 2001
Posts: 356
Likes: 1
From: Somewhere
That is not my car, I found that on the tire section and I can't remember whose it is. But I have a 99 wing on my car as well but no pics on the web.
Yes the wing is fully adjustable with an allen wrench, it is a PIA to adjust it though because you have to take off both end panals and remove the screws then adjust the height.
It makes a noticable difference when driving even in the top position. I had to get the front r1 spliter for mine because the front end was getting a little light.
Maybe after I get my rims from Rishie I will post some pics of my car.
Yes the wing is fully adjustable with an allen wrench, it is a PIA to adjust it though because you have to take off both end panals and remove the screws then adjust the height.
It makes a noticable difference when driving even in the top position. I had to get the front r1 spliter for mine because the front end was getting a little light.
Maybe after I get my rims from Rishie I will post some pics of my car.
Trending Topics
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Take a look at mine. The pic's of my frontend are old, but the wing is the same! Its the '99 adjustable wing. I bought it from Jason @ the RX7store.[URL=http://www.angelfire.com/ab/teamdevious/ernie.html]
Joined: Feb 2001
Posts: 6,541
Likes: 0
From: Abingdon, Md
Rotary Enthusiast
Joined: Feb 2002
Posts: 828
Likes: 0
From: Frisco, Texas
Originally posted by ErnieT
Take a look at mine. The pic's of my frontend are old, but the wing is the same! Its the '99 adjustable wing. I bought it from Jason @ the RX7store.[URL=http://www.angelfire.com/ab/teamdevious/ernie.html]
Take a look at mine. The pic's of my frontend are old, but the wing is the same! Its the '99 adjustable wing. I bought it from Jason @ the RX7store.[URL=http://www.angelfire.com/ab/teamdevious/ernie.html]
Junior Member
Joined: Apr 2002
Posts: 5
Likes: 0
From: Toronto
Originally posted by Vintage Red Touring
One of the guys here in Dallas has done the complete 99 make over to his 93 FD. Paint, wing, bumper, the whole 9 yards. It looks sweet. I attached a pic.
One of the guys here in Dallas has done the complete 99 make over to his 93 FD. Paint, wing, bumper, the whole 9 yards. It looks sweet. I attached a pic.
03 Cobra Killer
Joined: Jan 2002
Posts: 1,423
Likes: 0
From: All Over
That's my car @ http://flathat.woodstream.net/RX7/
(in various stages over the past few months, from completely stock when I bought it to ummm, not-stock)
Thanks for the compl's.
k
(in various stages over the past few months, from completely stock when I bought it to ummm, not-stock)
Thanks for the compl's.
k
)
Originally posted by Trauma
johnsrx7 > nice rims !
wich brand and size are they ?
johnsrx7 > nice rims !
wich brand and size are they ?
and heres a site that will supply all parts for the conversion. im sure you can find them cheaper on different sites but if ya add it ALL up you can git a starting figure....http://www.optauto.com/webstore/prod...t=490&last=490
Originally posted by legendr35
Does anyone make fake 99 wings? 800bux is too much for a wing.
Does anyone make fake 99 wings? 800bux is too much for a wing.
http://www.rx7store.net/racingbeatfiberglass.htm
