My deck is playing little radio games with me
06-28-12, 10:29 AM
#1
Full Member
Thread Starter
Join Date: Jun 2011
Location: alaska
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
My deck is playing little radio games with me
So, life was good. Was driving to work one morning listening to my boom booms, and the my deck shut off and turned back on..... Few seconds later, same thing. Now, every time I accelerate, my deck loses all power, when I push my brakes in, my deck now has power...... What in the world is going on here!
06-30-12, 01:18 PM
#2
Full Member
Thread Starter
Join Date: Jun 2011
Location: alaska
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
So, life was good. Was driving to work one morning listening to my boom booms, and the my deck shut off and turned back on..... Few seconds later, same thing. Now, every time I accelerate, my deck loses all power, when I push my brakes in, my deck now has power...... What in the world is going on here!
Do I need to take a video of what's happening? Someone help....??
07-03-12, 04:36 PM
#4
Full Member
Thread Starter
Join Date: Jun 2011
Location: alaska
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone help me with my wiring? Its all wrong. Previous owner did something. There is wires that say tail light and turn signals etc..... My deck shouldn't be wired into turn signals. Which means those wired are wrong. If someone is interested in helping I'll upload pics ASAP. Thanks.
Curt
Curt
07-07-12, 08:00 AM
#6
sounds like someone might have added a DRL relay or something. I had to wired mine (JDM import in canada) i used the accessory on / 12V from the stereo to provide the +12v constant and trigger for the relay, tied both the relay ground and my car stereo ground together. then ran the out from the relay to my park lamps. when i first wired them i had reconnected both the trigged out from the relay and the input from the light switch on the searing, any time i turned my signals on or turned my headlamps on my radio would cut out. just had to snip the side of the wires coming off the switch into the park lamps and BOOM fixed.
i hope this helps, sounds like you do have a bad ground / ground loop somewhere.
i hope this helps, sounds like you do have a bad ground / ground loop somewhere.
07-07-12, 09:19 AM
#7
Full Member
Thread Starter
Join Date: Jun 2011
Location: alaska
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
sounds like someone might have added a DRL relay or something. I had to wired mine (JDM import in canada) i used the accessory on / 12V from the stereo to provide the +12v constant and trigger for the relay, tied both the relay ground and my car stereo ground together. then ran the out from the relay to my park lamps. when i first wired them i had reconnected both the trigged out from the relay and the input from the light switch on the searing, any time i turned my signals on or turned my headlamps on my radio would cut out. just had to snip the side of the wires coming off the switch into the park lamps and BOOM fixed.
i hope this helps, sounds like you do have a bad ground / ground loop somewhere.
i hope this helps, sounds like you do have a bad ground / ground loop somewhere.
anyways,
thanks!
curtis-
Thread
Thread Starter
Forum
Replies
Last Post