logo113

hi everyone, I happen to come across a set of mazdaspeed seats, (the syntetic black leather with the MS logo all across the middle), but i think they were on a fc. Where can i purchase the rails/adapters to use them on a fd? i have been looking every where in the net but no luck. thanks for the help.

logo113

Guess not

logo113

nobody has any idea? I might just sell them an get something else.

Tai-Lun

iTrader: (8)

Mine came with the brackets but the seats have sliders already on them. Check to see if the brackets have FD on them and if not Id just have them made at a shop as they are 4 small peices of metal and shouldn't cost too much.

carx7

iTrader: (31)

Correct. You can' get the bracket adapter anymore. making them at a shop woudln't be too bad.... but it would be 10x easier if we could find a stock set to pattern.

I've been looking for over a year since I screwed up and didn't buy the adapter before mazda stopped making them

logo113

yes, mine have the sliders too, but the pieces that bolt to the car are wrong.

Tai-Lun

iTrader: (8)

these are FD mounts: http://rupewrecht.com/forsale/fs_ms_...atbrackets.jpg

Clockwise from top (pictured is USDM diver seat set/JDM passenger seat) is rear left, rear right, front right, front left. A fabricator could make these pretty easily.

logo113

hey Tai-lun , can you make those? if you can let me know.

Tai-Lun

iTrader: (8)

Sorry I don't fabricate, if you can find a shop that makes seat rails or things like that and show them that picture they can probably make the parts. That is what I would have done if I didnt have the mounts. If a lot of people had the seats and needed mounts I would have them fabricated but there isnt much demand as they are not common seats.