Looking for JL Audio Stealthbox for FD
#101
blown up motors
iTrader: (1)
Originally Posted by X-JaVeN-X
OH...and someobody make one of these for the FC...since there are 2 or 3 of you that say you have the means to do it...one of you do the fd...and somebody do the FC.
i need and FC to make 1.. bring your car here and i will make 1 and give you a killer deal
#102
Rotary Freak
iTrader: (9)
Ok whos making these Spyder or 81gsl12a??? Cause this is getting confusing, to many taking on one project.
Originally Posted by The Spyder
Made the mold today .
And anyone who thinks they can make this out of MDF is insane. I got my hands on the org today. Yeah... wow. Its a direct fit to the spare tire. I will post some pictures a bit later. The plexi really makes it nice too. I wish I could make it sit about an inch lower, but its a tight fit as it is.
And anyone who thinks they can make this out of MDF is insane. I got my hands on the org today. Yeah... wow. Its a direct fit to the spare tire. I will post some pictures a bit later. The plexi really makes it nice too. I wish I could make it sit about an inch lower, but its a tight fit as it is.
#104
Drive.
Join Date: Oct 2002
Location: Washington, North Carolina
Posts: 1,676
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by 81gsl12a
i need and FC to make 1.. bring your car here and i will make 1 and give you a killer deal
If you're serious, then PM me with more info...I just purchased a 12" elemental designs 13kv.2 about 2 mins ago off ebay, but I haven't purchased a box for it. I'd hate to put a standard hatch box in there if I can get something a little more custom.
Where is morgantown anyway? I'm about 1.5 hours from the outer banks (so pretty close to the coast). Anyway, let me know and we may be able to work something out. I should have my car back on the road in about a week...it's been getting a new fmic and some other things put on.
#105
blown up motors
iTrader: (1)
Originally Posted by turBRO240
^^ or teamafx? im kinda confuzed too... 3 people are saying that they have the molds... but yet not no final product or price or someone that says that theyr acually going to make it?
i dont have a mold.. but i will get my friend to bring me his 3rd gen and also is there any1 with a 2nd gen close to morganton NC 28655? i need to make a mold of a 2nd gen and dont want to sit in a junk yard lol
#106
Rotary Freak
iTrader: (4)
Join Date: Dec 2003
Location: pembroke, massachusetts
Posts: 2,534
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by X-JaVeN-X
OH...and someobody make one of these for the FC...since there are 2 or 3 of you that say you have the means to do it...one of you do the fd...and somebody do the FC.
#109
blown up motors
iTrader: (1)
If TEAMAFX wants to make the boxes and sell them.. that is fine with me i really only want to be a last resort lol.if no1 steps up and makes any by the end of the month i will make them...
or if some1 is close by and they want them i can do that.. just come by the shop
or if some1 is close by and they want them i can do that.. just come by the shop
#111
Never give up!
iTrader: (8)
Someone walked away with my ******* Nikon D70 and memory card at my buddies shop. Anyways, the lexan/plexi from tap plastics is going to run about $100 to duplicate the stock piece. The box uses a resin base, reinforced with mdf rings for the sub mounts (sandwiched), and again a MDF ring on the top for the plexi mounting.
Getting form fitting carpet is the ONLY problem me and my friend have encountered so far. ANy suggestions guys?
Getting form fitting carpet is the ONLY problem me and my friend have encountered so far. ANy suggestions guys?
#113
Rotary Enthusiast
Yea, just plain black carpet will be fine, or just ship the box un-carpeted and i'll carpet it myself. It just has to look pretty when you lift up the hatch carpet, thats it. The bottom of the box doesn't have to be "oh-so-nice" cause no one will ever see it.
#114
Certified Rotorhead
iTrader: (1)
Originally Posted by vspecpgt
Yea, just plain black carpet will be fine, or just ship the box un-carpeted and i'll carpet it myself. It just has to look pretty when you lift up the hatch carpet, thats it. The bottom of the box doesn't have to be "oh-so-nice" cause no one will ever see it.
...would make for a very clean setup.
#115
Rotary Enthusiast
iTrader: (2)
I'm not quite as concerened with the carpet as I am the actual enclosure. I can have the enclosure carpeted and the speakers installed here. I can't believe this is happening. People have been looking for these for years.
Originally Posted by The Spyder
Someone walked away with my ******* Nikon D70 and memory card at my buddies shop. Anyways, the lexan/plexi from tap plastics is going to run about $100 to duplicate the stock piece. The box uses a resin base, reinforced with mdf rings for the sub mounts (sandwiched), and again a MDF ring on the top for the plexi mounting.
Getting form fitting carpet is the ONLY problem me and my friend have encountered so far. ANy suggestions guys?
Getting form fitting carpet is the ONLY problem me and my friend have encountered so far. ANy suggestions guys?
#116
Drive.
Join Date: Oct 2002
Location: Washington, North Carolina
Posts: 1,676
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by turBRO240
Acually.... i was thinking of putting the box in and cutting the hatch carpet by the shape of the plexiglass... so you open the hatch and its a regular hatch with a cutout around only the plexiglass with a view of the subs and amp.
...would make for a very clean setup.
...would make for a very clean setup.
#117
Rotary Enthusiast
yea, sounds like a good idea, but i wouldn't want all the crap i throw in my truck scratching it... ok, so i don't keep much in my truck, but still, wouldn't want my beer caps to scratch the plexi coming home from the grocery store.
#118
blown up motors
iTrader: (1)
Originally Posted by Mazdabation
By the sounds of it 81gsl12a, your just making a mold of the spare tire comp, and a custom setup. We dont want a mold of that, we want an exact replica of the JL stealth box. if you dont have one of those to copy then im out.
shawn
shawn
a mold of the turnk is more or less all that box is... with a amp rack inside of it.. its very ez to copy just from the pics of it... like The Spyder said its got MDF rings for everything to mount to.. and a port to help keep the amp cool...the only down fall is the amp takes up air space and tuning the box would change with the size of the amp used.. if every1 used diff amps then every box would be tuned diff...
i am fine with not doing it.. just thought i would help out... just so you know no1 else has a mold of the JL box they are just copying it
#119
Certified Rotorhead
iTrader: (1)
Originally Posted by X-JaVeN-X
That would be good...but I would also keep the piece you cut out...and maybe attach some velcro...so that you could put the carpet back down to cover up the system from thieves....just a suggestion.
anyone have a pic of the box INSTALLED?
#122
Gone to the dark side
iTrader: (9)
Join Date: Jun 2005
Location: New Orleans, LA
Posts: 1,066
Likes: 0
Received 0 Likes
on
0 Posts
Guys, I talked to Cat Five again and they have sourced a vendor to build for us... a Vacuum molded polymer box.
They want to know if we want a smaller sub with amp enclosed in the box or a larger sub with no amp.
I'd like to know what you guys would prefer.
They want to know if we want a smaller sub with amp enclosed in the box or a larger sub with no amp.
I'd like to know what you guys would prefer.