Let's see pics of aftermarket seats in installed in FDs!
06-19-07, 08:57 PM
#151
wpt- ill take better pics for you when i get the chance.
rx7@rocketship- im not sure how these seats would feel on stock rails compared to factory seats, but on the memory fab superlo rails, i feel lower in the car. i am 6'0 and i am looking out the windshield a little above my gauge cluster. ill get pics of that tomorrow as well.
rx7@rocketship- im not sure how these seats would feel on stock rails compared to factory seats, but on the memory fab superlo rails, i feel lower in the car. i am 6'0 and i am looking out the windshield a little above my gauge cluster. ill get pics of that tomorrow as well.
06-20-07, 09:38 PM
#152
wpt- it's the regular EVO seat.
Sparco Evo:
Sparco Evo on MemoryFab Lo Rails with door closed:
Evo and MemoryFab side room:
Evo with door open (NOTE- i have rear plastic side pieces removed for the roll bar, which opened up more room):
Evo Head Room:
Sparco Evo:
Sparco Evo on MemoryFab Lo Rails with door closed:
Evo and MemoryFab side room:
Evo with door open (NOTE- i have rear plastic side pieces removed for the roll bar, which opened up more room):
Evo Head Room:
Last edited by ZumSpeedRX-7; 06-20-07 at 09:59 PM.
06-20-07, 10:19 PM
#155
1. because im a poor college student
2. my passengers comfort is not my problem.
3. this isnt a show car by anymeans; i still get function and form with both since they are both FIA Homologated, both support 5pt harnesses, and both weigh less then 18lbs.
4. im planning on taking the passenger seat out altogether once i get my racing license (i hate driving with passengers in this car as it is).
2. my passengers comfort is not my problem.
3. this isnt a show car by anymeans; i still get function and form with both since they are both FIA Homologated, both support 5pt harnesses, and both weigh less then 18lbs.
4. im planning on taking the passenger seat out altogether once i get my racing license (i hate driving with passengers in this car as it is).
06-21-07, 06:37 AM
#156
Newb Photog
Join Date: Jul 2001
Location: new jersey
Posts: 2,171
Likes: 0
Received 0 Likes
on
0 Posts
Lookinmg at the .pdf from Sparco, the regulare Evo shoulder bolsters measure at 23.9 and the Sparco Pro2000 at 23.4 (I may just be in luck; Same seat rails different seats)
06-22-07, 04:07 AM
#160
strictly business
iTrader: (8)
Join Date: May 2005
Location: chamber of farts
Posts: 6,187
Likes: 0
Received 0 Likes
on
0 Posts
1. because im a poor college student
2. my passengers comfort is not my problem.
3. this isnt a show car by anymeans; i still get function and form with both since they are both FIA Homologated, both support 5pt harnesses, and both weigh less then 18lbs.
4. im planning on taking the passenger seat out altogether once i get my racing license (i hate driving with passengers in this car as it is).
2. my passengers comfort is not my problem.
3. this isnt a show car by anymeans; i still get function and form with both since they are both FIA Homologated, both support 5pt harnesses, and both weigh less then 18lbs.
4. im planning on taking the passenger seat out altogether once i get my racing license (i hate driving with passengers in this car as it is).
_JPG.jpg)
_JPG.jpg)
07-13-07, 12:44 PM
#170
Seibon Carbon
Anybody try the Seibon Carbon (or Carbon Kevlar) racing seats in the FD?
http://www.seiboncarbon.com/pdut_det...asp?ItemID=529
http://www.seiboncarbon.com/pdut_det...asp?ItemID=529
_JPG.jpg)
_JPG.jpg)
07-15-07, 05:53 PM
#175
Full Member
Join Date: May 2003
Location: GA, Ontario Canada
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
http://a332.g.akamai.net/f/332/936/1...20031596-E.jpg
anyone know where to get similar looking seats ? =]
anyone know where to get similar looking seats ? =]