I need some help with audio setup it's 93 rx7
07-11-02, 01:38 PM
#1
I need some help with audio setup it's 93 rx7
Hey I have small problem with radio setup, whenever I turn up the power loud {medium level} it shut off but the radio is still on but no sound's comes out from the radio. I noticed when completly shut the radio power switch off and turn it back on then I have sound coming out from the speakers. Here my setup I have kenwood excelon head unit and passive exq, front speakers r 2 -4 inch kenwood and 2 small tweeters, rear I have 2-6X8 and 1-10 inch bazook tube with a Jensen amp that supposed to 220 watt's. Also the amp is a 2 channell amp. all of the speakers is hook up the amp. what do u guy's is my problem?
07-14-02, 03:30 PM
#3
Passenger
Posts: n/a
That is your amp's overload circuit cutting the power. You are drawing too much current from the amp! You are giving it only about a half ohm of load, and there are only a few amps I know of that can handle that, and Jensen isn't one of them. Either get an additional amp, buy a Soundstream, or connect your fronts and rears directly to the head unit and connect the subs to the amp. You WILL fry the amp eventually if you don't connect it correctly!
