I need a Clifford Alarm Expert!
#1
I need a Clifford Alarm Expert!
I'm trying to install my Smart Window 2 from my other car to my RX7 and I figured all the wiring except for three wires going into the main alarm unit.
If Anyone know how to hook this part, I would greatly appreciated!
PHIL
If Anyone know how to hook this part, I would greatly appreciated!
PHIL
#4
Senior Member
Join Date: Feb 2001
Location: los angeles CA
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
If you look at the clifford website, they have the wiring diagram for your alarm on there. Here I have the link for you:
http://www.clifford.com/guides/wirin...900_wiring.pdf
Now, if you need the wiring diagram for smart windows 2 it's on the same page, here's the link:
http://www.clifford.com/guides/wirin...ow2_wiring.pdf
Just connect the appropriate wires. If your still stuck, shoot me a PM and I'll try to help you out.
eric
http://www.clifford.com/guides/wirin...900_wiring.pdf
Now, if you need the wiring diagram for smart windows 2 it's on the same page, here's the link:
http://www.clifford.com/guides/wirin...ow2_wiring.pdf
Just connect the appropriate wires. If your still stuck, shoot me a PM and I'll try to help you out.
eric
#5
Senior Member
Join Date: Feb 2001
Location: los angeles CA
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
Ok I got the install guides faxed to me here goes:
Smartwindows 2:
Yellow wire (Channel 2 input) connects to Gray/Blue or Gray/Red of your 9000iq. (it depends on what other accessorie channels your running)
Green wire (Armed output of alarm) connects to Green/White of 9000iq (to roll windows up when alarm is armed).
Yellow/White wire (siren output) connects to Yellow wire 9000iq (this is the extra siren output wire of the 9000iq).
thats it. I'd connect the Gray/Blue wire since your using it as the forth channel right? This is how I have my car wired.
eric
Smartwindows 2:
Yellow wire (Channel 2 input) connects to Gray/Blue or Gray/Red of your 9000iq. (it depends on what other accessorie channels your running)
Green wire (Armed output of alarm) connects to Green/White of 9000iq (to roll windows up when alarm is armed).
Yellow/White wire (siren output) connects to Yellow wire 9000iq (this is the extra siren output wire of the 9000iq).
thats it. I'd connect the Gray/Blue wire since your using it as the forth channel right? This is how I have my car wired.
eric
#6
Thank you SO much!!
Eric,
thank you so much.. Would it be possible for me to get a copy of that fax you recieved?? I will pm you with my fax number at work..
I would greatly appreciated!!
Thanks again for your help.
If there is something I could do for you, please let me know..
PHIL
thank you so much.. Would it be possible for me to get a copy of that fax you recieved?? I will pm you with my fax number at work..
I would greatly appreciated!!
Thanks again for your help.
If there is something I could do for you, please let me know..
PHIL
Trending Topics
#9
Sorry about that.. For some reason, my computer just posted that.. anyhow,
I was wondering if I could get a copy of installer's manual for 900IQ and Smart window 2.. More so of Smart Window two..
When I was upgrading my old alarm (with smart 2) the guy gave me a fax copy of one page of smart window installer's manual.. I wanted to get the other to properly test my alarm..
If you could help, I would greatly appreciated!
PHIL
I was wondering if I could get a copy of installer's manual for 900IQ and Smart window 2.. More so of Smart Window two..
When I was upgrading my old alarm (with smart 2) the guy gave me a fax copy of one page of smart window installer's manual.. I wanted to get the other to properly test my alarm..
If you could help, I would greatly appreciated!
PHIL
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
15
09-08-15 05:30 PM