I need a Clifford Alarm Expert!
 

I'm trying to install my Smart Window 2 from my other car to my RX7 and I figured all the wiring except for three wires going into the main alarm unit.

If Anyone know how to hook this part, I would greatly appreciated!

PHIL

whats your main alarm unit???

900 IQ
 

I have a 900 IQ Clifford.. And I dont know where the three wires from Smart Window hooks up to..

If you could help, I would greatly appreciated!

If you look at the clifford website, they have the wiring diagram for your alarm on there. Here I have the link for you:

http://www.clifford.com/guides/wirin...900_wiring.pdf

Now, if you need the wiring diagram for smart windows 2 it's on the same page, here's the link:

http://www.clifford.com/guides/wirin...ow2_wiring.pdf

Just connect the appropriate wires. If your still stuck, shoot me a PM and I'll try to help you out.

eric

Ok I got the install guides faxed to me here goes:

Smartwindows 2:
Yellow wire (Channel 2 input) connects to Gray/Blue or Gray/Red of your 9000iq. (it depends on what other accessorie channels your running)

Green wire (Armed output of alarm) connects to Green/White of 9000iq (to roll windows up when alarm is armed).

Yellow/White wire (siren output) connects to Yellow wire 9000iq (this is the extra siren output wire of the 9000iq).

thats it. I'd connect the Gray/Blue wire since your using it as the forth channel right? This is how I have my car wired.

eric

Thank you SO much!!
 

Eric,

thank you so much.. Would it be possible for me to get a copy of that fax you recieved?? I will pm you with my fax number at work..

I would greatly appreciated!!

Thanks again for your help.

If there is something I could do for you, please let me know..

PHIL

Got everything you need?> My work is a clifford dealer..

Mike-p-28,

I was wondering if

Sorry about that.. For some reason, my computer just posted that.. anyhow,

I was wondering if I could get a copy of installer's manual for 900IQ and Smart window 2.. More so of Smart Window two..

When I was upgrading my old alarm (with smart 2) the guy gave me a fax copy of one page of smart window installer's manual.. I wanted to get the other to properly test my alarm..

If you could help, I would greatly appreciated!

PHIL