Here are some pictures of my problem; I was wondering what the best way to fix this is? (Cracked dash)
My plan was to take it off and then attach it with metal strips and JB weld then bondo it then primer and pant it with flat black, does that sound good?
Could you please post a link on the removal too?


Any help is appreciated, thanks Scott

 

Just replace it. Looks like you have mix-matched 93 and 94 parts anyway. Shame for you, I just sold a RHD gauge/meter hood and cover. How did you manage to break it?

You can find one for a decent price though.

the PDF was too big to upload so I got screenshots of the removal pages.

not pictured in the instructions below is the 4 screws you have to remove after the cluster is out of the plastic. These 4 screws hold the hood to the cover. Remove them then replace the hood.

 

thanks for the replay and how you see it is how i bought it.

 

whoever replaced the cluster cover with the 94+ style probably didn't know how to remove it properly and yanked up instead of slid it forward.

 

There should be a law against buying glue without first passing a training course on proper application.

 

Ok so my question is how do you disconnect the cigarette lighter outlet?

 

Nevermind....I just found it to be a stubborn to slide while pushing the clip.