how do they fix the rear 1/4 panels on fd
08-24-02, 07:32 PM
#2
Lurking..................
Join Date: Mar 2001
Location: PA
Posts: 2,220
Likes: 0
Received 0 Likes
on
0 Posts
Weld on a new one? I am afraid I don't get exactly what you want to know..
But depending on how bad your quarter panel is bent in you may be able to pull most of it out and then fill in with body filler(cheaper) or you might have to cut the old one out and weld in a new quarter panel.
But depending on how bad your quarter panel is bent in you may be able to pull most of it out and then fill in with body filler(cheaper) or you might have to cut the old one out and weld in a new quarter panel.
08-24-02, 07:37 PM
#3
u drill out all the spot welds, cut the pillar between the roof and the belt moulding on the door, and cut the bottom of the quarter panel where it joins the outer rocker panel, its easy, i joined a coupe quarter panel to a convertible before on my 2nd gen, i also changed the strut tower on my fd
Last edited by unvmyrx7; 08-24-02 at 07:41 PM.
